Open Access
EPJ Web Conf.
Volume 180, 2018
EFM17 – Experimental Fluid Mechanics 2017
Article Number 02109
Number of page(s) 9
Section Contributions
Published online 04 June 2018
  1. V. Tesar, Impinging jets. In Vortex Rings and Jets (ed. D. T. H. New & S. C. M.Yu), pp. 191-233. Springer Singapore. [Google Scholar]
  2. N. Zuckerman, N. Lior, Jet Impingement Heat Transfer: Physics, Correlations, and Numerical Modeling, Advances in heat transfer, vol. 39, 2006, ISBN-13: 978-0120200399. [Google Scholar]
  3. Martin H., Heat and mass transfer between impinging gas jets and solid surfaces, Advances in Heat Transfer, Vol. 13, 1977, pp. 1-60. [CrossRef] [Google Scholar]
  4. S. J. Downs, E. H. James, Jet impingement heat transfer - a literature survey, Proceedings of the National Heat Transfer Conference, ASME, Pennsylvania, 1987. [Google Scholar]
  5. R. Viskanta, Heat transfer to impinging isothermal gas and flame jets, Experimental Thermal and Fluid Science, Vol. 6, 1993, pp. 111-134. [CrossRef] [Google Scholar]
  6. S. V. Garimella, Heat transfer and flow fields in confined jet impingement, Annual Review of Heat Transfer, Vol. XI, 2000, pp. 413-494. [CrossRef] [Google Scholar]
  7. Z. Travnicek, F. Krizek, Impinging jet and combined slot nozzle, Heat Mass Transfer 35 (5) (1999) 351-356. [CrossRef] [Google Scholar]
  8. F. Marsik, P. Safarik, Z. Travnicek, Instability and Bistability of Stagnation Flow, International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, Gdanks, Poland, Sept 4-7, 2001. [Google Scholar]
  9. H. Shariatmadar, A. Momeni, A. Karimi, M. Ashjaee, Heat transfer characteristics of laminar slot jet arrays impinging on a constant target surface temperature, Applied Thermal Engineering 76 (2015) 252-260. [Google Scholar]
  10. Y. Kokoshima, A. Shimizu, T. Murao, Numerical analysis of annular turbulent jet impinging on a flat plate, in: Proceedings of the 3rd Triennial International Symposium on Fluid Control, Measurement, and Visualization, FLU-COME 91, ASME, San Francisco, 1991, pp. 205-210. [Google Scholar]
  11. Z. Travnicek, K. Peszynski, J. Hosek, S. Wawrzyniak, Aerodynamic and mass transfer characteristics of an annular bistable impinging jet with a fluidic flip-flop control, Int. J. Heat Mass Trans. 46 (7) (2003) 12651278. [Google Scholar]
  12. Z. Travnicek, V. Tesar, An annular impinging jet with recirculation zone expanded by acoustic excitation, Int. J. Heat Mass Trans. 47 (10) (2004) 2329-2341. [CrossRef] [Google Scholar]
  13. Z. Travnicek, V. Tesar, Hysteresis in annular impinging jets. Experimental Thermal and Fluid Science 44 (2013) 565-570. [CrossRef] [Google Scholar]
  14. V. Tesar, M. Jilek, Z. Randa, Topology changes in an annular impinging jet flow, in: Proceedings of the Topical Problems in Fluid Mechanics 2001, Institute of Thermomechanics CAS, Prague, 2001, pp. 121-124. [Google Scholar]
  15. T. Tisovsky, Bistability and Hysteresis of Annular Impinging Jet, The application of experimental and numerical methods in fluid mechanics and energy, Terchova - Vratna dolina, Slovakia, 2016. [Google Scholar]
  16. V. V. Lemanov, V. I. Terekhov, K. A. Sharov, A. A. Shumeiko, An Experimental Study of Submerged Jets at Low Reynolds Numbers, Technical Physics Letters, 2013, Vol. 39, No. 5, pp. 421-423. © Pleiades Publishing, Ltd., 2013. [Google Scholar]
  17. FLUENT 17.1 Users Guide. Fluent Inc., © 2016 SAS IP, Inc. [Google Scholar]
  18. L. D. Landau, E. M. Lifshitz, Fluid Mechanics, Second Edition: Volume 6 (Course of Theoretical Physics), 1987. [Google Scholar]
  19. R. I. Issa, Solution of implicitly discretized fluid flow equations by operator/splitting. J. Comput. Phys., 62, 40-65, 1986. [Google Scholar]
  20. A. Savitzky, M. J. E. Golay, Smoothing and Differentiation of Data by Simplified Least Squares Procedures. Analytical Chemistry 36 (8): 1627-39, 1964. doi:10.1021/ac60214a047 [Google Scholar]
  21. J. H. Ferziger, M. Peric, Computational Methods for Fluid Dynamics, 2001. [Google Scholar]
  22. R. J. Goldstein, K. A. Sobolik, W. S. Seol, Effect of entrainment on the heat transfer to a heated circular air jet impinging on a flat surface, Trans. ASME, Vol. 112, pp. 608-611, 1990. [Google Scholar]
  23. V. Uruba, On 3D Instability of Wake behind a Cylinder, The application of experimental and numerical methods in fluid mechanics and energy, Terchova - Vratna dolina, Slovakia, 2016. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.