Open Access
| Issue |
EPJ Web Conf.
Volume 183, 2018
DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 4 | |
| Section | Experimental Techniques | |
| DOI | https://doi.org/10.1051/epjconf/201818302002 | |
| Published online | 07 September 2018 | |
- J.F. Kalthoff, S.Winkler, Failure mode transition of high rates of shear loading, in :C.Y. Chiem, H,-D. Kunze, L.W. Meyer (Eds), Proceedings of the International Conference on Impact Loading and Dynamic Behavior of Materials, Deutsche Gesellschaft fur Metallkunde, DGM-Verlag, Oberursel, Germany, pp. 185-195, (1987) [Google Scholar]
- E. Roux, P. Longère, O. Cherrier, T. Millot, D. Capdeville, and J. Petit, “Analysis of ASB assisted failure in a high strength steel under high loading rate,” Mater. Des., vol. 75, pp. 149–159 (2015) [CrossRef] [Google Scholar]
- D. H. Li, Y. Yang, T. Xu, H. G. Zheng, Q. S. Zhu, and Q. M. Zhang, “Observation of the microstructure in the adiabatic shear band of 7075 aluminum alloy,” Mater. Sci. Eng. A, vol. 527, no. 15, pp. 3529–3535 (2010) [CrossRef] [Google Scholar]
- P. Longere and A. Dragon, “Dynamic vs. quasi-static shear failure of high strength metallic alloys: Experimental issues,” Mech. Mater., vol. 80, no. PB, pp. 203–218 (2015) [CrossRef] [Google Scholar]
- J. Richeton and S. Ahzi, “Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers : Characterization and modeling of the compressive yield stress,” vol. 43, pp. 2318– 2335 (2006) [Google Scholar]
- W. Chen, F. Lu, and M. Cheng, “Tension and compression tests of two polymers under quasi-static and dynamic loading,” vol. 21, pp. 113–121, (2002) [Google Scholar]
- E. M. Arruda, M. C. Boyce, and R. Jayachandran, “Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers,” vol. 19, pp. 193– 212 (1995) [Google Scholar]
- L. Lalande, C. J. G. Plummer, P. Ge, and J. E. Ma, “Microdeformation mechanisms in rubber toughened PMMA and PMMA-based copolymers,” vol. 73, pp. 2413–2426 (2006) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.