Open Access
EPJ Web Conf.
Volume 225, 2020
ANIMMA 2019 – Advancements in Nuclear Instrumentation Measurement Methods and their Applications
Article Number 04018
Number of page(s) 8
Section Research Reactors
Published online 20 January 2020
  1. C. Pralong Fauchre, O. Joneja, R. Chawla, P. Grimm, F. Jatuff and M. Murphy, “Reactor analysis methods 5 Within–Pin Reaction Rate Distributions in a SVEA-96+ Fuel Assembly,” Transactions of the American Nuclear Society, 211–212, 2001. [Google Scholar]
  2. C. Pralong Fauchre, M. Murphy, F. Jatuff and R. Chawla, “Within–pin Reaction Rate Distributions: CASMO–4 and HELIOS Compared Against Tomographic Measurements at the PROTEUS Reactor,” Nuclear Science and Engineering, 150:1, 27–36, 2005. [CrossRef] [Google Scholar]
  3. K. Macku, F. Jatuff, M. Murphy, M. Plaschy, P. Grimm, O. P. Joneja and R. Chawla, “Radial and Azimuthal 235U Fission and 238U Capture Distributions in BWR UO2 Pins: CASMO–4 and MCNP4C versus Activation Foil Measurements,” Nuclear Science and Engineering, 155:1, 96–101, 2007. [CrossRef] [Google Scholar]
  4. M. F. Murphy, M. Plaschy, F. Jatuff, U. Bergmann and R. Chawla, “Fission and capture rate measurements in a SVEA–96 OPTIMA2 BWR assembly compared with MCNPX predictions,” United States: American Nuclear Society – ANS, 2006. [Google Scholar]
  5. V. Lamirand, M. Hursin, P. Frajtag, G. Perret, O. Pakari and A. Pautz, “Future experimental programmes in the CROCUS reactor,” European Research Reactor Conference (RRFM) 2016: Conference Proceedings, (p. 1154). Belgium: European Nuclear Society, 2016. [Google Scholar]
  6. F. Vitullo, V. Lamirand and A. Pautz, “A novel neutron detector for localized in–core measurements in the CROCUS reactor for high–fidelity code validation purposes.” The poster will be presented at the Poster session at the FISA2019 conference, 4–7 June 2019, Pitesti, Romania. [Google Scholar]
  7. R. T. Kouzes, A. T. Lintereur, and E. R. Siciliano, “Progress in alternative neutron detection to address the helium–3 shortage,” Nucl. Instruments Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip., vol. 784, pp. 172–175, Jun. 2015. [CrossRef] [Google Scholar]
  8. C. Mori, T. Osada, K. Yanagida, T. Aoyama, A. Uritani, H. Miyahara, Y. Yamane, K. Kobayashi, C. Ichihara and S. Shiroya, “Simple and Quick Measurement of Neutron Flux Distribution by Using an Optical Fiber with Scintillator,” Journal of Nuclear Science and Technology, 31:3, 248–249, 1994. [Google Scholar]
  9. Y. Yamane, A. Uritani, and T. Misawa, “Measurement of the thermal and fast neutron flux in a research reactor with a Li and Th loaded optical fibre detector,” Nucl. Instruments Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip., vol. 432, pp. 403–409, 1999. [CrossRef] [Google Scholar]
  10. M. Stagliano, A. Chierici, L. Abego, and F. dErrico, “Silicon photomultiplier current and prospective applications in biological and radiological photonics,” se, vol. 4, no. 10, pp. 10–29, Oct. 2018. [Google Scholar]
  11. J.–B. Mosset, A. Stoykov, U. Greuter, A. Gromov, M. Hildebrandt, T. Panzner and N. Schlump, “A 16–ch module for thermal neutron detection using ZnS:6LiF scintillator with embedded WLS fibers coupled to SiPMs and its dedicated readout electronics,” Nucl. Instruments Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip., vol. 845, pp. 494–498, 2016. [CrossRef] [Google Scholar]
  12. A. Stoykov, J. –B. Mosset, and M. Hildebrandt, “Trigger Efficiency of a ZnS:6LiF Scintillation Neutron Detector Readout With a SiPM,” IEEE Trans. Nucl. Sci., vol. 63, no. 4, pp. 2271–2277, 2016. [Google Scholar]
  13. International Atomic Energy Agency, “Advanced Surveillance, Diagnostic and Prognostic Techniques in Monitoring Structures, Systems and Components in Nuclear Power Plants,” IAEA Nuclear Energy Series No. NP-T-3.14, Vienna, 2013. [Google Scholar]
  14. V. Lamirand, “Installation nucléaire CROCUS - Rapport de sécurité version 1.2,” 2017. [Google Scholar]
  15. Scintacor, “Neutron Screens,”. [Online]. Available: [Google Scholar]
  16. C. W.E van Eijk, “Neutron PSDs for the next generation of spallation neutron sources,” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Volume 477, Issues 13, 2002, Pages 383–390. [CrossRef] [Google Scholar]
  17. N. Soppera, M. Bossant and E. Dupont, “JANIS 4: An Improved Version of the NEA Java–based Nuclear Data Information System,” Nuclear Data Sheets, Volume 120, June 2014, Pages 294–296. [CrossRef] [Google Scholar]
  18. G.F. Knoll, “Radiation Detection and Measurement,” 4th edition, 2010. [Google Scholar]
  19. ESKA, “Specification sheet SH–8001,” 2001. Available: [Google Scholar]
  20. Saint–gobain, “Safety data sheet BC–630 Silicone Grease,” 2017. Available: [Google Scholar]
  21. A. Ghassemi, K. Sato, and K. Kobayashi, “MPPC – Technical note,” Hamamatsu Photonics K.K., Solid State Division, 2017. Available: kapd9005e.pdf [Google Scholar]
  22. CANBERRA, “Model 2022 Spectroscopy Amplifier,” 2010. Available: [Google Scholar]
  23. CANBERRA, “Model 2030 SCA.” Available: [Google Scholar]
  24. ORTEC, “926-M32-USB Multichannel Analyzer,” 2015. Available: [Google Scholar]
  25. TELEDYNE LECROY, “WaveSurfer 10 oscilloscope,” 2015. Available: [Google Scholar]
  26. V. Lamirand, O. Pakari and A. Pautz, “Power calibration methodology at the CROCUS reactor, ” presented at ANIMMA2019 conference, 17–21 June 2019, Portoroz, Slovenia. [Google Scholar]
  27. G. Perret, G. Girardin, P. Frajtag, and M. Hursin, “Decay constant and delayed neutron fraction measurements in CROCUS,” Paul Scherrer Institut, TM-41-14-02 Rev. 1, 2014. [Google Scholar]
  28. M. Hursin, C. Weiss, P. Frajtag, V. Lamirand, G. Perret, P. Kavrigin, A. Pautz, and E. Griesmayer, “Testing of a sCVD diamond detection system in the CROCUS reactor,” Eur. Phys. J. A, 54: 82, 2018. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.