Open Access
EPJ Web Conf.
Volume 248, 2021
V International Conference “Modeling of Nonlinear Processes and Systems“ (MNPS-2020)
Article Number 04008
Number of page(s) 7
Section Workshop on Advanced Materials Processing and Smart Manufacturing
Published online 26 April 2021
  1. M.M. Paley, Grinding and grinding technology of the cutting tool / M.M. Paley, L.G. Dibner, M.D. Flyd (M.: Mashinostroenie, 1988) [Google Scholar]
  2. Pat. 101666 Russian Federation, MPK B 24 D 7/06. Grinding wheel for high-speed machining / D.S. Rechenko, K.V. Averkov, A.Yu. Popov; applicant and owner of OmGTU № 2010139548/02; declared. 24.09.2010; op. 27.01.2011, Bulletin No. 3. – 2 с.: silt. [Google Scholar]
  3. Pat. 146505 Russian Federation, IPC B24D 3/32. Grinding tool / D.S. Rechenko, B.P. Kudryashov, A.Yu. Popov; applicant and owner of OmGTU № 2014123264/02; declared. 06.06.2014; op. 10.10.2014, Bulletin No. 28. – 1 с.: silt. [Google Scholar]
  4. Pat. 2440229 Russian Federation, IPC B24B 1/00, B24B 9/16, B28D 5/02. Method of superhard materials processing / D.S. Rechenko, A.Yu. Popov. 08.02.2010; op. 20.01.2012, Bulletin No. 2. – 1 с. [Google Scholar]
  5. Pat. 2547980 Russian Federation, IPC B24B 3/36. Method of sharpening the metal-cutting tool blade with a grinding wheel / D.S. Rechenko, A.Yu. Popov; applicant and owner of OmGTU № 2013142129/02; declared. 13.09.2013; op. 10.04.2015, Bulletin No. 10. – 1 с. [Google Scholar]
  6. Pat. 55665 Russian Federation, MPK B24D 17/00. Grinding wheel for diamond and abrasive machining / D.S. Rechenko, Yu.R. Nurtdinov, A.Yu. Popov; applicant and owner of OmGTU № 2006111080/22; declared. 05.04.2006; op. cit. 27.08.2006, Bulletin No. 24. 2 p.: silt. [Google Scholar]
  7. D.S. Rechenko, Improvement of quality of the highspeed sharpening of the carbide tools by the diamond circles with the interrupted surface: (Dissertation ... Cand. of Sciences, Tomsk, 2009) [Google Scholar]
  8. V.A. Rybitskiy, Synthetic diamonds., 3, 32–35 (1978) [Google Scholar]
  9. L.N. Filimonov, High-speed grinding / L.N. Filimonov. L.N (Filimonov: Mashinostroenie, Leningr. departing, 1979) [Google Scholar]
  10. L.N. Filimonov, Grinding wheel resistance / L.N. Filimonov. L.N (Filimonov: Mashinostroenie, 1973) [Google Scholar]
  11. D.S. Rechenko, A.G. Kol’tsov, Russian Engineering Research, 32(2), 179–181 (2012) [Google Scholar]
  12. D.S. Rechenko, A.Y. Popov, K.V. Averkov, V.A. Sergeev, Russian Engineering Research, 32(56), 511–512 (2012) [Google Scholar]
  13. L. Tian, Y. Fub, J. Xub, H. Li, W. Ding, International Journal of Machine Tools & Manufacture, 89, 192–201 (2015) [Google Scholar]
  14. C. Wang, Q. Fang, J. Chen, Y. Liu, T. Jin, International Journal of Advanced Manufacturing Technology, 83, 937–948 (2016) [Google Scholar]
  15. L. Yang, Y. Fu, J. Xu, Y. Liu, Materials and Design, 88, 827–836 (2015) [Google Scholar]
  16. Z. Zhao, Z. Fu, J. Xu, Z. Zhang, The International Journal of Advanced Manufacturing Technology, 87, 3545–3555 (2016) [Google Scholar]
  17. Y. Zhu, W. Lu, Y. Sun, D. Zuo, The International Journal of Advanced Manufacturing Technology, 89, 1269–1277 (2017) [Google Scholar]
  18. S.N. Grigoriev, V.A. Grechishnikov, M.A. Volosova, X. Jiang, P.M. Pivkin, In IOP Conference Series: Materials Science and Engineering, 971(2), 022065 (2020) DOI:10.1088/1757-899X/971/2/022065 [Google Scholar]
  19. S.N. Grigoriev, P.M. Pivkin, V.A. Grechishnikov, Y.E. Petukhov, M.A. Volosova, A.B. Nadykto, Emerging Imaging and Sensing Technologies for Security and Defence V; and Advanced Manufacturing Technologies for Micro-and Nanosystems in Security and Defence III, 11540, 115401E (2020) [Google Scholar]
  20. S.N. Grigoriev, M.A. Volosova, A.A. Okunkova, S.V. Fedorov, K. Hamdy, P.A. Podrabinnik, ... , A.N. Porvatov, J. Manuf. Mater. Process., 4(3), 96 (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.