Open Access
Issue
EPJ Web Conf.
Volume 323, 2025
22nd International Metrology Congress (CIM2025)
Article Number 09004
Number of page(s) 4
Section Pollutant Analysis
DOI https://doi.org/10.1051/epjconf/202532309004
Published online 07 April 2025
  1. Q. Hassan, S. Algburi, A. Z. Sameen, H. M. Salman, M. Jaszczur, Green hydrogen: A pathway to a sustainable energy future. Int. J. Hydrogen Energy 50, 310–333 (2024). https://doi.org/10.1016/j.ijhydene.2023.08.321 [CrossRef] [Google Scholar]
  2. European Metrology project 21GRD05 Met4H2 Metrology for the hydrogen supply chain. https://met4h2.eu/ [Google Scholar]
  3. S. Dash, A. Singh K, J. S, V.H. Wilson D, E. D, S. K. Surapraraju, S. K. Natarajan, S. K. Natarajan, Advances in green hydrogen production through alkaline water electrolysis: A comprehensive review. Int. J. Hydrogen Energy 83, 614–629 (2024). https://doi.org/10.1016/j.ijhydene.2024.08.157 [Google Scholar]
  4. Impact of impurities on water electrolysis: a review. H. Becker, J. Murawski, D. V. Shinde, I. E. L. Stephens, G. Hinds, G. Smith, 2023, Impact of impurities on water electrolysis: a review. Sustain. Energy Fuels 7, 1565 (2023). https://doi.org/10.1039/d2se01517j [Google Scholar]
  5. ISO 14687:2019 Hydrogen fuel quality product specification. International Organization for Standardization (2019) [Google Scholar]
  6. UNE-EN 17124:2022 Hydrogen fuel Product specification and quality assurance for hydrogen refuelling points dispensing gaseous hydrogen Proton exchange membrane (PEM) fuel cell applications for vehicles. Spanish Association for Standardisation (2022) [Google Scholar]
  7. ISO 6142:2015 Gas analysis Preparation of calibration gas mixtures Part 1: Gravimetric method for Class I mixtures. International Organization for Standardization (2015) [Google Scholar]
  8. A. Rojo, E. Santamaria, Preparation of hydrogen chloride in hydrogen standard gas mixtures for hydrogen purity requirements. International Congress of Metrology (2019) 20002. https://doi.org/10.1051/metrology/201920002 [Google Scholar]
  9. J. Morville, S. Kassi, M. Chenevier, D. Romanini, Fast, low-noise, mode-by-mode, cavity-enhanced absorption spectroscopy by diode-laser self-locking. Appl. Phys. B Lasers Opt. 80, 1027 (2005). https://doi.org/10.1007/s00340-005-1828-z [Google Scholar]
  10. K. Arrhenius, O. Büker, A. Fischer, S. Persijn, N. D Moore, Development and evaluation of a novel analyser for ISO14687 hydrogen purity analysis. Meas. Sci. Technol. 31, 7 (2020). https://doi.org/10.1088/13616501/ab7cf3 [Google Scholar]
  11. C. Beurey, B. Gozlan, M. Carré, T. Bacquart, A. Morris, N. Moore, K. Arrhenius, H. Meuzelaar, S. Persijn, A. Rojo, A. Murugan, Review and Survey of Methods for Analysis of Impurities in Hydrogen for Fuel Cell Vehicles According to ISO 14687:2019. Front. Energy Res. 8, 615149 (2021). https://doi.org/10.3389/fenrg.2020.615149 [Google Scholar]
  12. S. Persijn, E. Efremov, Sampling lines for HCl (VSL, Delft, The Netherlands). Output 1 European Metrology project 17IND09 MetAMCII. https://empir.npl.co.uk/metamcii/wpcontent/uploads/sites/43/2019/11/Sampling-lines-forHCl-measurements.pdf [Google Scholar]
  13. Deliverable D4 – Good practice guide on the handling and use of static HCl reference materials for end users, including a full uncertainty budget for providing the infrastructure to underpin the measurements of these priority AMCs (HCl, NH3 and water vapour). European Metrology project 17IND09 MetAMCII. https://empir.npl.co.uk/metamcii/wpcontent/uploads/sites/43/2021/09/D4-Good-practiceguide-on-the-handling-and-use-of-static-HCl-referencematerials.pdf [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.