Open Access
| Issue |
EPJ Web Conf.
Volume 325, 2025
International Conference on Advanced Physics for Sustainable Future: Innovations and Solutions (IEMPHYS-24)
|
|
|---|---|---|
| Article Number | 01019 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/epjconf/202532501019 | |
| Published online | 05 May 2025 | |
- 1M K Aravindan 2Ashutosh Pattanaik, 1, 2 Department of Mechanical Engineering, “The Review on Hydroforming Processes” Faculty of Engineering and Technology, Jain (Deemed-to-be University), Bengaluru, India. [Google Scholar]
- O. G. Lee, Y. P. Korkolis, and J. H. Kim, “Recent developments in hydroforming technology,” in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015. [Google Scholar]
- R. A. Shinde, B. T. Patil, and K. N. Joshi, “Optimization of Tube Hydroforming Process (without Axial Feed) by Using FEA Simulations,” Procedia Technol., 2016. [Google Scholar]
- C. Liu and X. Xu, “Cyber-physical Machine Tool The Era of Machine Tool 4.0,” in Procedia CIRP, 2017. [Google Scholar]
- M. Ramezani and Z. M. Ripin, “Deep drawing using Verson hydroforming process,” in Rubber-Pad Forming Processes, 2012, pp. 149–172. [CrossRef] [Google Scholar]
- G. Palumbo, “Hydroforming a small scale aluminium automotive component using a layered die,” Mater. Des. 2013. [Google Scholar]
- P. Groche and F. Bäcker, “Springback in stringer sheet stretch forming,” CIRP Ann. Manuf. Technol., 2013. [Google Scholar]
- Md Rakibul Islam, Minghui Wang, “Digital Twin of Tube Hydroforming Press and Process”, (Department of Mechanical Engineering, Nanjing University of Science and Technology, 200 Xiaolingwei, Nanjing, China). [Google Scholar]
- Masaaki Mizumura, Manabu Wada, Koichi Sato, Keinosuke Iguchi, Masayoshi Suehiro, Yukihisa Kuriyama, “Tube Hydroforming: System Analysis and Process Design Development of New Hydroforming Methods”. [Google Scholar]
- 5 Vasile Ceclan1, Sorin Grozav 11 Technical University of Cluj Napoca, Faculty of Machine Building, Blv Muncii 103-105, Cluj Napoca, Romania. “Determination of the force required for the Hydroforming of Al 99”. [Google Scholar]
- Jian Zhang a, Peng Cheng a, Fang Wang b, Wenxian Tang a, Xilu Zhao c. “Hydroforming and buckling of an egg-shaped shell based on a petal-shaped preform”, School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang, 212003, China b Shanghai Engineering Research Center of Marine Renewable Energy, College of Engineering Science and Technology, Shanghai Ocean University, Shanghai, 201306, China c College of Mechanical Engineering, Saitama Institute of Technology, Saitama, 369 0293, Japan. [Google Scholar]
- G. Steinhagen a*, A. Hoffmann b; a Graebener Maschinentechnik GmbH & Co. KG, Am Heller 1, 57250 Netphen, Germany, b statmath GmbH, An der Alche 15, 57072 Siegen. “Process surveillance in hydroforming based on machine learning algorithms” [Google Scholar]
- H. J. Park, H. S. Cho, Journal of Engineering for Industry, 117 (1995) 297–303. “A Fuzzy Self Learning Control Method with Application to Hydroforming Processes” [Google Scholar]
- F Mohammadi, H Kashanizade, M Mosavi Mashadi. “Optimization using finite element analysis, neural network, and experiment in tube hydroforming of aluminium T joints”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221 (2013) 1299–1305. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.