Open Access
Issue |
EPJ Web Conf.
Volume 330, 2025
The 5th International Conference on Electrical Sciences and Technologies in the Maghreb (CISTEM 2024)
|
|
---|---|---|
Article Number | 05001 | |
Number of page(s) | 6 | |
Section | Power Quality Monitoring and Fault Diagnostic | |
DOI | https://doi.org/10.1051/epjconf/202533005001 | |
Published online | 30 June 2025 |
- M. Blödt, P. Granjon, B. Raison, G. Rostaing, and R. Gilles, “Models for Bearing Damage Detection in Induction Motors Using Stator Current Monitoring,” Inst. Electr. Electron. Eng., vol. 55, no. 4, p. 1813, 2008, doi: 10.1109/TIE.2008.917108ï. [Google Scholar]
- J. J. Saucedo-Dorantes, A. Y. Jaen-Cuellar, A. Perez-Cruz, and D. A. Elvira-Ortiz, “Detection of Inter-Turn Short Circuits in Induction Motors under the Start-Up Transient by Means of an Empirical Wavelet Transform and Self-Organizing Map,” Machines, vol. 11, no. 10, Oct. 2023, doi: 10.3390/machines11100958. [CrossRef] [Google Scholar]
- A. El Idrissi, A. Derouich, and S. Mahfoud, “Fault Diagnosis of the Bearing Outer Ring of an Induction Motor Under DTC Control by Using Hilbert Filter,” in Lecture Notes in Networks and Systems, 2022, vol. 454 LNNS, pp. 802–812. doi: 10.1007/978-3-031-01942-5_80. [CrossRef] [Google Scholar]
- El Idrissi, A., Derouich, A., Mahfoud, S., Ouanjli, N.E., Chantoufi, A. (2023). Bearing Ball Fault Diagnosis of an Induction Machine by Using the Hilbert Transform and the Performance of Intelligent Control. In: Motahhir, S., Bossoufi, B. (eds) Digital Technologies and Applications. ICDTA 2023. Lecture Notes in Networks and Systems, vol 669. Springer, Cham. https://doi.org/10.1007/978-3-031-29860-8_59. [Google Scholar]
- A. El Idrissi et al., “Bearing Fault Diagnosis for an Induction Motor Controlled by an Artificial Neural Network—Direct Torque Control Using the Hilbert Transform,” Mathematics, vol. 10, no. 22, 2022, doi: 10.3390/math10224258. [CrossRef] [Google Scholar]
- A. Chantoufi, A. Derouich, N. El Ouanjli, S. Mahfoud, A. El Idrissi, and M. Taoussi, “Direct Torque Control for Doubly Fed Induction Motor Driven Electric Vehicle,” in Lecture Notes in Networks and Systems, 2023, vol. 669 LNNS, pp. 862–871. doi: 10.1007/978-3-031-29860-8_86. [CrossRef] [Google Scholar]
- L. Van Brandt, F. Silveira, J. C. Delvenne, and D. Flandre, “On noise-induced transient bit flips in subthreshold SRAM,” Solid. State. Electron., vol. 208, Oct. 2023, doi: 10.1016/j.sse.2023.108715. [CrossRef] [Google Scholar]
- J.Le Besnerais, “Reduction of magnetic noise in PWM-supplied induction machines : low-noise design rules and multi-objective optimisation,” Thesis, no. November 2008, 2008. [Google Scholar]
- Z. Wang, Y. Gu, C. Chen, L. Wang, and X. Sun, “Induction Motor Noise Source Separation and Identification Based on Adaptive Scale-Space vol. 201, Dec. 2022, doi: 10.1016/j.apacoust.2022.109105. [Google Scholar]
- Q. Pan, R. Zhou, J. Su, T. He, and Z. Zhang, “Automatic localization of the rotor-stator rubbing fault based on acoustic emission method and higher-order statistics,” J. Mech. Sci. Technol., vol. 33, no. 2, pp. 513–524, Feb. 2019, doi: 10.1007/s12206-019-0104-9. [CrossRef] [Google Scholar]
- O. AlShorman et al., “Sounds and acoustic emission-based early fault diagnosis of induction motor: A review study,” Advances in Mechanical Engineering, vol. 13, no. 2. SAGE Publications Inc., 2021. doi: 10.1177/1687814021996915. [CrossRef] [Google Scholar]
- O. Alshorman and A. Alshorman, “A review of intelligent methods for condition monitoring and fault diagnosis of stator and rotor faults of induction machines,” Int. J. Electr. Comput. Eng., vol. 11, no. 4, pp. 2820–2829, Aug. 2021, doi: 10.11591/ijece.v11i4.pp2820-2829. [Google Scholar]
- N. K. Verma, R. K. Sevakula, S. Dixit, and A. Salour, “Intelligent Condition Based Monitoring Using Acoustic Signals for Air Compressors,” IEEE Trans. Reliab., vol. 65, no. 1, pp. 291–309, Mar. 2016, doi: 10.1109/TR.2015.2459684. [CrossRef] [Google Scholar]
- J.Le Besnerais, “Reduction of magnetic noise in PWM-supplied induction machines : low-noise design rules and multi-objective optimisation,” Thesis, no. September 2008, 2008. [Google Scholar]
- Z. Wang, J. Zhang, and Y. Liang, “Motor Noise and Vibration Test Research,” TELKOMNIKA, vol. 11, no. 1, pp. 87–94, 2013. [CrossRef] [Google Scholar]
- L. E. B. Jean, L. Vincent, H. Michel, and B. Pascal, “CALCUL DU BRUIT ACOUSTIQUE D ’ UNE MACHINE ASYNCHRONE A PAS FRACTIONNAIRE Le mod ` ele e etique Calcul des courants,” pp. 6–7, 2007. [Google Scholar]
- C. Wang, A. Astfalck, and J. C. S. Lai, “Sound power radiated from an inverter-driven induction motor: Experimental investigation,” IEE Proc. Electr. Power Appl., vol. 149, no. 1, pp. 46–52, Jan. 2002, doi: 10.1049/ip-epa:20020067. [CrossRef] [Google Scholar]
- D. A. Moysidis, G. D. Karatzinis, Y. S. Boutalis, and Y. L. Karnavas, “A Study of Noise Effect in Electrical Machines Bearing Fault Detection and Diagnosis Considering Different Representative Feature Models,” Machines, vol. 11, no. 11, p. 1029, Nov. 2023, doi: 10.3390/machines11111029. [CrossRef] [Google Scholar]
- W. Kester, “MT-003,” no. January, pp. 1–9, 2016. [Google Scholar]
- D. F. Williamson, R. A. Parker, and J. S. Kendrick, “The box plot: A simple visual method to interpret data,” Ann. Intern. Med., vol. 110, no. 11, pp. 916–921, 1989, doi: 10.7326/0003-4819-110-11-916. [CrossRef] [PubMed] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.