Open Access
| Issue |
EPJ Web Conf.
Volume 336, 2025
International Conference on Sustainable Development in Advanced Materials, Manufacturing, and Industry 4.0 (INSDAM’25)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 14 | |
| Section | Manufacturing | |
| DOI | https://doi.org/10.1051/epjconf/202533602002 | |
| Published online | 26 September 2025 | |
- T. Dursun, C. Soutis, Recent developments in advanced aircraft aluminium alloys. Mater. Des. 56, 862–871 (2014). https://doi.org/10.1016/j.matdes.2013.12.002 [CrossRef] [Google Scholar]
- F.C. Campbell, Manufacturing technology for aerospace structural materials (Butterworth-Heinemann, Elsevier, 2006), pp. 16–90 [Google Scholar]
- J.R. Davis, Aluminum and aluminum alloys, ASM Specialty Handbook (ASM International, Materials Park, 1994), pp. 579–706 [Google Scholar]
- N.J.H. Holroyd, A.K. Vasudevan, L. Christodoulou, Aluminum alloys— contemporary research and applications. Treatise on Mater. Sci. Technol. 31 (1989) [Google Scholar]
- C. Venkata Rao, G.M. Reddy, K. Srinivasa Rao, Microstructure and pitting corrosion resistance of AA2219 Al-Cu alloy friction stir welds – Effect of tool profile. Def. Technol. 11, 123–131 (2015). http://dx.doi.org/10.1016/j.dt.2014.10.003 [Google Scholar]
- J.A. McGeough, Advanced methods of machining (Chapman & Hall, New York, 1988), pp. 55–105 [Google Scholar]
- J. Prohaszka, A.G. Mamalis, N.M. Vaxevanidis, The effect of electrode material on machinability in wire electro-discharge machining. J. Mater. Process. Technol. 69(1–3), 233–237 (1997). https://doi.org/10.1016/S0924-0136(97)00024-1 [Google Scholar]
- R. Snoeys, F. Staelens, W. Dekeyser, Current trends in nonconventional material removal processes. CIRP Ann. 35(2), 467–480 (1986). https://doi.org/10.1016/S0007-8506(07)60195-4 [Google Scholar]
- S.K. Karna, R. Sahai, An overview on Taguchi method. Int. J. Eng. Math. Sci. 1, 11–18 (2012) [Google Scholar]
- V.M.J. Sharma, K.S. Kumar, B.N. Rao, S.D. Pathak, Effect of microstructure and strength on the fracture behavior of AA2219 alloy. Mater. Sci. Eng. A 502(1–2), 45–53 (2009). https://doi.org/10.1016/j.msea.2008.11.024 [Google Scholar]
- S. Malarvizhi, V. Balasubramanian, Effect of welding processes on AA2219 aluminium alloy joint properties. Trans. Nonferrous Met. Soc. China 21(5), 962–973 (2011). https://doi.org/10.1016/S1003-6326(11)60808-X [Google Scholar]
- P. Naga Raju, K. Srinivasa Rao, G.M. Reddy, M. Kamaraj, K.P. Rao, Microstructure and high temperature stability of age hardenable AA2219 aluminium alloy modified by Sc, Mg and Zr additions. Mater. Sci. Eng. A 464(1– 2), 192–201 (2007). https://doi.org/10.1016/j.msea.2007.01.144 [Google Scholar]
- Krishankant, J. Taneja, M. Bector, R. Kumar, Application of Taguchi method for optimizing turning process by the effects of machining parameters. Int. J. Eng. Adv. Technol. 2(1), 2249–8958 (2012) [Google Scholar]
- T. Lokeswara Rao, N. Selvaraj, Optimization of WEDM process parameters on Titanium alloy using Taguchi method. Int. J. Mod. Eng. Res. 3(4), 2281–2286 (2013) [Google Scholar]
- V.K. Jain, Advanced machining processes (Allied Publishers Pvt. Ltd., 2010), pp. 126–186 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.