Open Access
| Issue |
EPJ Web Conf.
Volume 336, 2025
International Conference on Sustainable Development in Advanced Materials, Manufacturing, and Industry 4.0 (INSDAM’25)
|
|
|---|---|---|
| Article Number | 02003 | |
| Number of page(s) | 12 | |
| Section | Manufacturing | |
| DOI | https://doi.org/10.1051/epjconf/202533602003 | |
| Published online | 26 September 2025 | |
- K. C. Jadav, S. O. Ismail, B. I. Oladapo, Benefiting from Biomimicry Through 3D Printing to Enhance Mechanical Properties of Polymeric Structures: Simulation Approach. Advances in Transdisciplinary Engineering. (2023). [Google Scholar]
- S. Muruganantham, M. Marappan, D. Ravichandran, S. Jeeva, R. Gopalakrishnan, S. Harikeswaran, C.J. Dhas, Effectiveness of loading and alkali treated fibers in improving mechanical characteristics of hybrid flax/bamboo polyester composites. AIP Conference Proceedings. 3306, 070004 (2025). [Google Scholar]
- Z. Xu, Z. Zhu, C. Jiang, Study on uniaxial compression mechanical properties of 3D printed columnar joint test blocks. Sci Rep. 14, (2024). [Google Scholar]
- S. Sakthivel, S. Magibalan, S. Jeyaprakasam, J. Venkatraman, Fire Resistance in E- Vehicles: A Study on MPP-Enhanced S-Glass/Phenolic Hybrid Composites. E3S Web of Conferences. 529, 02001 (2024). [Google Scholar]
- M. J. Catenacci, J. R. Owens, H. R. Luckarift, Effect of Geometry and Infill on Strength of 3D Printed Planar Matrices for Matting Applications. Transportation Research Record. 2676, (2022). [Google Scholar]
- L. Xia, R. Wang, L. Zheng, G. Chen, Y. Fang, Dynamic mechanical and thermal analysis of 3D-printed ABS/POE blends for tunable mechanical properties. Iranian Polymer Journal (English Edition). (2024). [Google Scholar]
- K. Schweizer, S. Bhandari, R. A. Lopez-Anido, M. Korey, H. Tekinalp, Recycling Large-Format 3D Printed Polymer Composite Formworks Used for Casting Precast Concrete - Technical Feasibility and Challenges. Journal of Composites for Construction. 28, (2024). [Google Scholar]
- M. Aslan, K. Çava, A. Uşun, O. Güler, Impact of Cell Design Parameters on Mechanical Properties of 3D-Printed Cores for Carbon Epoxy Sandwich Composites. Polymers (Basel). 17, (2025). [Google Scholar]
- G. Singh, G. S. Brar, R. Singh, On Mechanical Properties of 3D-Printed Secondary Recycled Acrylonitrile Butadiene Styrene Composite for Silencer Application in Short- Range Gun. J Mater Eng Perform. 33, (2024). [Google Scholar]
- T. Russell, D. A. Jack, Tensile and Compression Strength Prediction and Validation in 3D-Printed Short-Fiber-Reinforced Polymers. Polymers (Basel). 15, (2023). [Google Scholar]
- E. Gödek, S. Şevik, Ö. Özdilli, Pattern and filament optimization for 3D-printed reinforcements to enhance the flexural behavior of cement-based composites. Journal of Sustainable Construction Materials and Technologies. 8, (2023). [Google Scholar]
- A. Bouteldja, M. A. Louar, L. Hemmouche, L. Gilson, A. Miranda-Vicario, L. Rabet, Experimental investigation of the quasi-static and dynamic compressive behavior of polymer-based 3D-printed lattice structures. Int J Impact Eng. 180, (2023). [Google Scholar]
- H. Alshahrani, V. R. Arun Prakash, Load bearing investigations on novel Acrylonitrile butadiene styrene-carbon quantum dots 3D printed core/bamboo fiber polyester sandwich composite for structural applications. Polym Compos 45, (2024). [Google Scholar]
- A. Sadooghi, M. R. Ebrahimian, S. J. Hashemi, R. Sayar, K. Rahmani, M. Bodaghi, Impact of Infill Density and Glass Fiber Reinforcement on the Compressive and Bending Strength of Acrylonitrile Butadiene 3D-Printed Corrugated Sandwich Panels. Adv Eng Mater. 27, (2025). [Google Scholar]
- M. Easwaramoorthi, A. Giridharan, K. Nandhakumar, E. Pradeep, G. Rangith, Mechanical Characterization and Predictive Analysis of Flax Fiber/PLA Honeycomb Sandwich Structures in FDM Additive Manufacturing. E3S Web of Conferences. 559, 02010 (2024). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.