Open Access
| Issue |
EPJ Web Conf.
Volume 336, 2025
International Conference on Sustainable Development in Advanced Materials, Manufacturing, and Industry 4.0 (INSDAM’25)
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 15 | |
| Section | Industry 4.0 | |
| DOI | https://doi.org/10.1051/epjconf/202533603002 | |
| Published online | 26 September 2025 | |
- Wiangkham, A., Ariyarit, A., & Aengchuan, P. (2023). Prediction of the influence of loading rate and sugarcane leaves concentration on fracture toughness of sugarcane leaves and epoxy composite using artificial intelligence. Composites Part B: Engineering, 253, 110567. [Google Scholar]
- Hamdia, K. M., Lahmer, T., Nguyen-Thoi, T., & Rabczuk, T. (2021). Predicting the fracture toughness of PNCs: A stochastic approach based on ANN and ANFIS. Materials Science and Engineering: A, 802, 140465. [Google Scholar]
- Alipour, M., Esatyana, E., Sakhaee-Pour, A., Sadooni, F. N., & Al-Kuwari, H. A. (2022). Characterizing fracture toughness using machine learning. Journal of Petroleum Science and Engineering, 208, 109367. [Google Scholar]
- Hernández-Olivares, F., et al. (2015). Short sugarcane bagasse fibers cementitious composites for building construction. Construction and Building Materials, 78, 277–284. [Google Scholar]
- Mulinari, D. R., Voorwald, H. J. C., Cioffi, M. O. H., da Silva, M. L. C. P., Gouvêa da Cruz, T., & Saron, C. (2010). Sugarcane bagasse cellulose/HDPE composites obtained by extrusion. Composites Part A: Applied Science and Manufacturing, 41(5), 617–622. [Google Scholar]
- Yadav, S. K. J., Vedrtnam, A., & Gunwant, D. (2022). Experimental and numerical study on mechanical behavior and resistance to natural weathering of sugarcane leave reinforced polymer composite. Journal of Composite Materials, 56(12), 1719–1734. [Google Scholar]
- Libos, I. L. S., & Cui, L. (2022). Effects of curing time, cement content, and saturation state on mode-I fracture toughness of cemented paste backfill. Construction and Building Materials, 313, 125469. [Google Scholar]
- León, N., Martínez, A. B., & Maspoch, M. (2022). Notch effect on the linear elastic fracture mechanics values of a polysulfone thermoplastic polymer. Polymer Testing, 105, 107413. [Google Scholar]
- Areias, P., Reinoso, J., Camanho, P. P., de Sá, J. C., & Rabczuk, T. (2022). Effective 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation. Computer Methods in Applied Mechanics and Engineering, 397, 115190. [Google Scholar]
- Coelho, R. D., Vásquez Lizcano, J., da Silva Barros, T. H., da Silva Barbosa, F., Veloso Leal, D. P., da Costa Santos, L., Ribeiro, N. L., Fraga Júnior, E. F., & Martin, D. L. (2022). Effect of water stress on renewable energy from sugarcane biomass. Renewable Energy, 182, 182–195. [Google Scholar]
- Qiao, L., Liu, Y., & Zhu, J. (2022). Application of generalized regression neural network optimized by fruit fly optimization algorithm for fracture toughness in a pearlitic steel. Engineering Fracture Mechanics, 271, 108653. [Google Scholar]
- Wiangkham, A., Ariyarit, A., & Aengchuan, P. (2022). Prediction of the mixed mode I/II fracture toughness of PMMA by an artificial intelligence approach. Materials Today Communications, 31, 103692. [Google Scholar]
- Hsu, Y. C., Yu, C. H., & Buehler, M. J. (2022). Using deep learning to predict fracture patterns in crystalline solids. npj Computational Materials, 8, 47. [Google Scholar]
- Ocampo Batlle, E. A., Da Costa Bortoni, E., Escobar Palacio, J. C., Nogueira, L. A. H., Silva Lora, E. E., Carrillo Caballero, G. E., Vitoriano Julio, A. A., & Cárdenas Escorcia, Y. (2022). Energy, economic, and environmental assessment of the integrated production of palm oil biodiesel and sugarcane ethanol. Journal of Cleaner Production, 332, 130045. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.