EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 340 (2025) EPJ Web Conf., 340 (2025) 11002 References
Open Access
Issue
EPJ Web Conf.
Volume 340, 2025
Powders & Grains 2025 – 10th International Conference on Micromechanics on Granular Media
Article Number 11002
Number of page(s) 4
Section Powders and Grains in Pharma- and Food Processes
DOI https://doi.org/10.1051/epjconf/202534011002
Published online 01 December 2025
  1. S. M. A. Noori Rahim Abadi, P. Hagqvist, F. Sikström, I. Choquet, Cfd-based feasibility study of laser-directed energy deposition with a metal wire for on-orbit manufacturing, Frontiers in Space Technologies 3, 880012 (2022). [Google Scholar]
  2. T. D. Ngo, A. Kashani, G. Imbalzano, K. T. Nguyen, D. Hui, Additive manufacturing (3d printing): A review of materials, methods, applications and challenges, Composites Part B: Engineering 143, 172 (2018). [CrossRef] [Google Scholar]
  3. S. Wen, Y. Shin, J. Murthy, P. Sojka, Modeling of coaxial powder flow for the laser direct deposition process, International Journal of Heat and Mass Transfer 52, 5867 (2009). [Google Scholar]
  4. O. Kovalev, I. Kovaleva, I. Y. Smurov, Numerical investigation of gas-disperse jet flows created by coaxial nozzles during the laser direct material deposition, Journal of Materials Processing Technology 249, 118 (2017). [Google Scholar]
  5. Z. Liu, H. C. Zhang, S. Peng, H. Kim, D. Du, W. Cong, Analytical modeling and experimental validation of powder stream distribution during direct energy deposition, Additive Manufacturing 30, 100848 (2019). [Google Scholar]
  6. J. Lin, Numerical simulation of the focused powder streams in coaxial laser cladding, Journal of Materials Processing Technology 105, 17 (2000). [Google Scholar]
  7. S. Zekovic, R. Dwivedi, R. Kovacevic, Numerical simulation and experimental investigation of gas–powder flow from radially symmetrical nozzles in laser-based direct metal deposition, International Journal of Machine Tools and Manufacture 47, 112 (2007). [Google Scholar]
  8. P. Balu, P. Leggett, R. Kovacevic, Parametric study on a coaxial multi-material powder flow in laserbased powder deposition process, Journal of Materials Processing Technology 212, 1598 (2012). [Google Scholar]
  9. H. Tan, C. Zhang, W. Fan, F. Zhang, X. Lin, J. Chen, W. Huang, Dynamic evolution of powder stream convergence with powder feeding durations in direct energy deposition, International Journal of Machine Tools and Manufacture 157, 103606 (2020). [Google Scholar]
  10. A. J. Pinkerton, Advances in the modeling of laser direct metal deposition, Journal of laser applications 27, S15001 (2015). [Google Scholar]
  11. S. Liu, Y. Zhang, R. Kovacevic, Numerical simulation and experimental study of powder flow distribution in high power direct diode laser cladding process, Lasers in Manufacturing and Materials Processing 2, 199 (2015). [Google Scholar]
  12. C. Katinas, W. Shang, Y. C. Shin, J. Chen, Modeling particle spray and capture efficiency for direct laser deposition using a four nozzle powder injection system, Journal of Manufacturing Science and Engineering 140 (2018). [Google Scholar]
  13. Q. Chai, X. He, Y. Xing, G. Sun, Numerical study on the collision effect of particles in the gas-powder flow by coaxial nozzles for laser cladding, Optics & Laser Technology 163, 109449 (2023). [Google Scholar]
  14. T. Mede, M. Godec, Relevance of inter-particle interaction in directed energy deposition powder stream, Powder Technology 435, 119393 (2024). [Google Scholar]
  15. V. Smilauer, E. Catalano, B. Chareyre, S. Dorofeenko, J. Duriez, A. Gladky, J. Kozicki, C. Modenese, L. Scholtès, L. Sibille et al., Yade reference documentation, Yade Documentation 474 (2010). [Google Scholar]
  16. T. Mede, A. Jeromen, E. Govekar, M. Mallon, M. Godec, Influence of particle size on powder velocity distribution at the nozzle outlet in directed energy deposition, Available at SSRN 5116848 (preprint). [Google Scholar]
  17. A. Otto, H. Koch, R. G. Vazquez, Multiphysical simulation of laser material processing, Physics Procedia 39, 843 (2012). [Google Scholar]
  18. S. Elghobashi, On predicting particle-laden turbulent flows, Applied scientific research 52, 309 (1994). [Google Scholar]
  19. D. Kunhappan, B. Harthong, B. Chareyre, G. Balarac, P. J. Dumont, Numerical modeling of high aspect ratio flexible fibers in inertial flows, Physics of Fluids 29 (2017). [Google Scholar]
  20. D. Kunhappan, Ph. D. thesis, Université Grenoble Alpes (2018) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.