Open Access
| Issue |
EPJ Web Conf.
Volume 345, 2026
4th International Conference & Exposition on Materials, Manufacturing and Modelling Techniques (ICE3MT2025)
|
|
|---|---|---|
| Article Number | 01069 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/epjconf/202634501069 | |
| Published online | 07 January 2026 | |
- S. Bayraktar, A. P. Hekimoğlu, Effect of zinc content and cutting tool coating on the machinability of the Al-(5–35) Zn alloys. Metals and Materials Int. 26, 477-490 (2020). [Google Scholar]
- J. Singh, S. S. Gill, A. Mahajan, Experimental investigation and optimizing of turning parameters for machining of Al7075-T6 aerospace alloy for reducing the tool wear and surface roughness. J. Mat. Eng. Perfor. 33, 8745–8756 (2024). [Google Scholar]
- A. Sequeiera, D. Deepak, H. K. Sachidananda, Experimental study on machining of AA7075 using Taguchi method. SN Applied Sci. 5, 11 (2023). [Google Scholar]
- S.K. Soni, B. Thomas, Microstructure, Mechanical properties and machinability studies of Al7075/SiC/h-BN hybrid nanocomposite fabricated via ultrasonic-assisted squeeze casting. FME Trans. 48, 532-542 (2020). [Google Scholar]
- C. Kannan, R. Ramanujam, A.S.S. Balan, Machinability studies on Al 7075/BN/Al2O3 squeeze cast hybrid nanocomposite under different machining environments. Mat. Manuf. Process. 33 (5), 587-595 (2018). [Google Scholar]
- R. Magabe, K. Gupta, Investigation on machinability of Aluminum 7075 under dry environment. FME Trans. 51, 470-479 (2023). [Google Scholar]
- M. Lakshmanan, J. Selwin Rajadurai, S. Rajakarunakaran, Machining studies of Al7075 in CNC turning using grey relational analysis. Mat. Today: Proceedings 39 (4) 1625-1628 (2021). [Google Scholar]
- H. Ramakrishnan, R. Balasundaram, P. Selvaganapathy, M. Santhakumari, P. Sivasankaran, P. Vignesh, Experimental investigation of turning Al 7075 using Al2O3 nano-cutting fluid: ANOVA and TOPSIS approach. SN Appl. Sci. 1, 1639 (2019). [Google Scholar]
- P. Zhang, Y. Li, Y. Liu, Y. Zhang, J. Liu, Analysis of the microhardness, mechanical properties and electrical conductivity of 7055 aluminum alloy. Vacuum, 171, 109005 (2020). [Google Scholar]
- A.N. Aliyah, A. Anawati, Effect of Heat Treatment on Microstructure and mechanical hardness of aluminum alloy AA7075. In IOP conference series: Mat. Sci. Eng. 541 (1), 012007 (2019). [Google Scholar]
- M.J. Anahid, H. Heydarnia, S.A. Niknam, H. Mehmanparast, Evaluating the sensitivity of acoustic emission signal features to the variation of cutting parameters in milling aluminum alloys: Part A: frequency domain analysis. Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 235(10), 1558-1568 (2021). [Google Scholar]
- T. Vié, S. Deschanel, N. Godin, B. Normand, On the effect of coatings on the tensile and fatigue properties of 7075-T6 aluminum alloy monitored with acoustic emission (AE): Towards lifetime estimation. Int. J. Fatigue, 171, 107578 (2023). [Google Scholar]
- P. Sutowski, M. Sutowska, W. Kapłonek, The use of high-frequency acoustic emission analysis for in-process assessment of the surface quality of aluminium alloy 5251 in abrasive waterjet machining. Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 232(14), 2547-2565 (2018). [Google Scholar]
- N.D. Bankar, G.D. Shelke, M.D. Irfan, Experimental investigation of Aluminum 7075 using dry, wet and MQL condition. International Research Journal of Engineering and Technology 6 (10) 957-962 (2019). [Google Scholar]
- V Muthuraman, S Arunkumar, Experimental evaluation of machining parameters in machining of 7075 aluminium alloy with cryogenic liquid nitrogen coolant. IOP Conf. Series: Materials Science and Engineering 183, 012012 (2017). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.