EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 345 (2026) EPJ Web Conf., 345 (2026) 01070 References
Open Access
Issue
EPJ Web Conf.
Volume 345, 2026
4th International Conference & Exposition on Materials, Manufacturing and Modelling Techniques (ICE3MT2025)
Article Number 01070
Number of page(s) 10
DOI https://doi.org/10.1051/epjconf/202634501070
Published online 07 January 2026
  1. N. Espallargas, J. Berget, J. M. Guilemany, A. V. Benedetti, and P. H. Suegama, “Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance,” Surf. Coatings Technol., 2008, doi: 10.1016/j.surfcoat.2007.06.048. [Google Scholar]
  2. D. G. Bhosale and W. S. Rathod, “Tribological behaviour of atmospheric plasma and high velocity oxy-fuel sprayed WC-Cr3C2-Ni coatings at elevated temperatures,” Ceram. Int., vol. 46, no. 8, pp. 12373–12385, 2020, doi: 10.1016/j.ceramint.2020.01.288. [Google Scholar]
  3. K. Szymański, A. Hernas, G. Moskal, and H. Myalska, “Thermally sprayed coatings resistant to erosion and corrosion for power plant boilers - A review,” Surf. Coatings Technol., vol. 268, 2015, doi: 10.1016/j.surfcoat.2014.10.046. [Google Scholar]
  4. P. Shi et al., “Tribological performance and high temperature oxidation behaviour of thermal sprayed Ni- and NiCrAlY-based composite coatings,” Surf. Coatings Technol., vol. 405, no. November 2020, pp. 1–12, 2021, doi: 10.1016/j.surfcoat.2020.126615. [Google Scholar]
  5. P. Suresh Babu, P. Chanikya Rao, A. Jyothirmayi, P. Sudharshan Phani, L. Rama Krishna, and D. Srinivasa Rao, “Evaluation of microstructure, property and performance of detonation sprayed WC-(W,Cr)2C-Ni coatings,” Surf. Coatings Technol., vol. 335, no. December 2017, pp. 345–354, 2018, doi: 10.1016/j.surfcoat.2017.12.055. [Google Scholar]
  6. J. J. Tian, X. T. Luo, J. Wang, and C. J. Li, “Mechanical performance of plasma- sprayed bulk-like NiCrMo coating with a novel shell-core-structured NiCr-Mo particle,” Surf. Coatings Technol., vol. 353, no. August, pp. 179–189, 2018, doi: 10.1016/j.surfcoat.2018.08.082. [Google Scholar]
  7. C. Xu et al., “Friction coefficient: A significant parameter for lost circulation control and material selection in naturally fractured reservoir,” Energy, vol. 174, pp. 1012–1025, 2019, doi: 10.1016/j.energy.2019.03.017. [Google Scholar]
  8. A. S. Khanna, S. Kumari, S. Kanungo, and A. Gasser, “Hard coatings based on thermal spray and laser cladding,” Int. J. Refract. Met. Hard Mater., vol. 27, no. 2, pp. 485–491, 2009, doi: 10.1016/j.ijrmhm.2008.09.017. [Google Scholar]
  9. S. R. Medabalimi and R. Ramesh, and M R Kadoli, “High-temperature wear and frictional behavior of partially oxidized Al with NiCr composite coating,” Mater. Res. Express, vol. 6, no. 12, pp. 1–13, 2019, doi: 10.1088/2053-1591/ab5c34. [Google Scholar]
  10. V. H. Hidalgo, F. J. B. Varela, A. C. Menéndez, and S. P. Martínez, “A comparative study of high-temperature erosion wear of plasma-sprayed NiCrBSiFeC and WC- NiCrBSiFeC coatings under simulated coal-fired boiler conditions,” Tribol. Int., vol. 34, no. 3, pp. 161–169, 2001, doi: 10.1016/S0301-679X(00)00146-8. [Google Scholar]
  11. D. G. Bhosale, W. S. Rathod, and S. W. Rukhande, “Effect of counter faces on sliding wear behavior of WC-Cr3C2-Ni composite coating deposited by high velocity oxy fuel,” Mater. Today Proc., vol. 41, pp. 780–785, 2020, doi: 10.1016/j.matpr.2020.08.466. [Google Scholar]
  12. G. M. Balamurugan, M. Duraiselvam, and V. Anandakrishnan, “Comparison of high temperature wear behaviour of plasma sprayed WC-Co coated and hard chromium plated AISI 304 austenitic stainless steel,” Mater. Des., vol. 35, pp. 640–646, 2012, doi: 10.1016/j.matdes.2011.10.012. [Google Scholar]
  13. J. G. Liu et al., “Effect of flow velocity on erosion–corrosion of 90-degree horizontal elbow,” Wear, vol. 376–377, pp. 516–525, 2017, doi: 10.1016/j.wear.2016.11.015. [Google Scholar]
  14. Q. B. Nguyen et al., “Effect of impact angle and testing time on erosion of stainless steel at higher velocities,” Wear, vol. 321, pp. 87–93, 2014, doi: 10.1016/j.wear.2014.10.010. [Google Scholar]
  15. H. Arabnejad, S. A. Shirazi, B. S. McLaury, H. J. Subramani, and L. D. Rhyne, “The effect of erodent particle hardness on the erosion of stainless steel,” Wear, vol. 332–333, 2015, doi: 10.1016/j.wear.2015.01.017. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.