Open Access
| Issue |
EPJ Web Conf.
Volume 345, 2026
4th International Conference & Exposition on Materials, Manufacturing and Modelling Techniques (ICE3MT2025)
|
|
|---|---|---|
| Article Number | 01071 | |
| Number of page(s) | 13 | |
| DOI | https://doi.org/10.1051/epjconf/202634501071 | |
| Published online | 07 January 2026 | |
- K. Dhinesh, P. S. Arun, K. K. L. Senthil et al., Study on flexural and tensile behavior of PLA, ABS and PLA-ABS materials, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.03.546 [Google Scholar]
- Mahros Darsin, Izharudin Ahmad, Intan Hardiatama, Agus Triono, & I Made Ivan Wiyarta Cakra Sujana. (2024). The Effect of the Combination of PLA, PP, and ABS Filaments on Flexural Strength in FDM 3D Printing. Journal of Information Technology, Computer Science and Electrical Engineering, 1(S1), 41–46. https://doi.org/10.61306/jitcse.v1iS1.18 [Google Scholar]
- A. Rodríguez-Panes, J. Claver, A.M. Camacho, The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis. Materials 2018, 11, 1333. https://doi.org/10.3390/ma11081333 [Google Scholar]
- M. Lay, N. L. Najwa Thajudin, Z. A. A. Hamid, A. Rusli, M. K. Abdullah, & R. K. Shuib, (2019). Comparison of physical and mechanical properties of PLA, ABS and nylon 6 fabricated using fused deposition modeling and injection molding. Composites Part B: Engineering, 107341. doi:10.1016/j.compositesb.2019.10 [Google Scholar]
- Algarni, M.; Ghazali, S. Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG’s Mechanical Properties to FDM Printing Process Parameters. Crystals 2021, 11, 995. https://doi.org/10.3390/cryst11080995 [Google Scholar]
- Dhinesh, S. K., Arun, P. S., Senthil, K. K. L., & Megalingam, A. (2020). Study on flexural and tensile behavior of PLA, ABS and PLA-ABS materials. Materials Today: Proceedings. doi:10.1016/j.matpr.2020.03.546. [Google Scholar]
- San Andrés, M., Chércoles, R., Navarro, E., de la Roja, J. M., Gorostiza, J., Higueras, M., & Blanch, E. (2023). Use of 3D printing PLA and ABS materials for fine art. Analysis of composition and long-term behaviour of raw filament and printed parts. Journal of Cultural Heritage, 59, 181-189. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.