EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 354 (2026) EPJ Web Conf., 354 (2026) 01002 References
Open Access
Issue
EPJ Web Conf.
Volume 354, 2026
19th Global Congress on Manufacturing and Management (GCMM 2025)
Article Number 01002
Number of page(s) 14
Section Advanced Materials, Composites, and Electromagnetic Structures
DOI https://doi.org/10.1051/epjconf/202635401002
Published online 02 March 2026
  1. Anbalagan, A., Launchbury, E. J., Kauffman, M., Pazhani, A., & Xavior, M. A. (2023). Investigation on CFRP 3D printing build parameters and their effect on topologically optimised complex models. Materials Today: Proceedings. [Google Scholar]
  2. Andersson, J., & Grönkvist, S. (2019). Large-scale storage of hydrogen. International journal of hydrogen energy, 44(23), 11901–11919. [Google Scholar]
  3. International Organization for Standardization. (2020). Gas cylinders—Design, construction and testing of refillable composite gas cylinders and tubes—Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners (ISO 11119-3:2020). https://www.iso.org/standard/75817.html [Google Scholar]
  4. SAE International. (2010). SAE J2579: Technical information report for fuel systems in fuel cell and other hydrogen vehicles. National Renewable Energy Laboratory. https://docs.nrel.gov/docs/fy11osti/49867.pdf [Google Scholar]
  5. Sun, W. X., Li, Y. T., Huang, W. J., Zhang, Y. M., Fan, M., Xiao, Z. M., & Li, W. G. (2026). Advances in failure assessment of Type IV hydrogen storage vessels: A critical review. Renewable and Sustainable Energy Reviews, 226, 116353. [Google Scholar]
  6. Eun, J. H., Ahn, H. C., & Lee, J. S. (2025). Compatibility of liner materials for type IV hydrogen storage vessels and the interlaminar properties of liner/CFRP composites. International Journal of Hydrogen Energy, 133, 431–439. [Google Scholar]
  7. Katsumata, S., Ogasawara, T., Uchino, T., Hirayama, N., Sakata, K., & Uzawa, K. (2025). Experimental and analytical study of a high-pressure hydrogen storage tank made of CFRP with dome-cylinder split molding structure for fuel cell vehicles. International Journal of Hydrogen Energy, 101, 269–279. [Google Scholar]
  8. Ubaid, J., Andrew, J. J., Cantwell, W. J., Khan, K. A., Potluri, P., & Umer, R. (2025). Performance evaluation of GNP-modified epoxy/carbon fiber composites after cryogenic thermal cycling for hydrogen storage applications. International Journal of Hydrogen Energy, 159, 150574. [Google Scholar]
  9. Qi, L., Gao, R., Mei, Z., Cheng, L., Min, W., Kang, D., Yu M., & Sun, Z. (2024). An investigation on enhancing the bonding properties of PA11-CFRP interface in type IV high pressure hydrogen storage vessel through nanosecond pulsed laser treatment and failure mechanism research. International Journal of Hydrogen Energy. [Google Scholar]
  10. Zhou, C., Lin, H., Jia, X., Yang, Z., Zhang, G., Xia, L., … & Li, M. (2024). Impact morphology characteristics and damage evolution mechanisms in CFRP laminates for hydrogen storage cylinders. International Journal of Hydrogen Energy, 77, 110–125. [Google Scholar]
  11. Wang, L., Wang, B., Wei, S., Hong, Y., & Zheng, C. (2016). Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure. Composites Part B: Engineering, 97, 274–281. [Google Scholar]
  12. Graziosi, S., Cannazza, F., Vedani, M., Ratti, A., Tamburrino, F., & Bordegoni, M. (2020). Design and testing of an innovative 3D-printed metal-composite junction. Additive Manufacturing, 36, 101311. [Google Scholar]
  13. Liu, G., Xiong, Y., & Zhou, L. (2021). Additive manufacturing of continuous fibre reinforced polymer composites: Design opportunities and novel applications. Composites Communications, 27, 100907. [Google Scholar]
  14. Wu, W., Xie, D., Huang, J., Wang, Q., Chen, Q., & Huang, J. (2023). Adhesion enhancement for nickel layer deposited on carbon fiber reinforced polymer (CFRP) composites by pretreatment processes for lightning strike. The Journal of Adhesion, 99(7), 1099–1122. [Google Scholar]
  15. Pizzorni, M., Lertora, E., & Parmiggiani, A. (2022). Adhesive bonding of 3D-printed short-and continuous-carbon-fiber composites: An experimental analysis of design methods to improve joint strength. Composites Part B: Engineering, 230, 109539. [Google Scholar]
  16. Lestari, W. D., Mukti, A. S., Adyono, N., Diyasa, I. G. S. M., Sari, N. K., Caesarendra, W., … & Budiwan, I. (2025). Optimization of 3D Printing Parameters for Carbon Fiber Reinforced Polymer (CFRP) Material: Impact and Hardness Analysis Using Taguchi Method. Results in Materials, 100727. [Google Scholar]
  17. Abualbandora, T. A., Alshneeqat, M. G., & Mourad, A. H. I. (2025). Impact of 3D printing parameters of short carbon fiber reinforced polymer CFRP on the mechanical and failure performance: Review and future perspective. Next Materials, 8, 100645. [Google Scholar]
  18. Yan, A., Deng, B., Peng, F., Yi, J., Li, Z., Shen, J., … & Tang, X. (2025). A stepwise parameter planning methodology for 3D printing of continuous fiber reinforced polymer composites. Composites Part A: Applied Science and Manufacturing, 199, 109228. [Google Scholar]
  19. Bendine, K., Gibhardt, D., Fiedler, B., & Backs, A. (2022). Experimental characterization and mechanical behavior of 3D printed CFRP. European Journal of Mechanics-A/Solids, 94, 104587. [Google Scholar]
  20. San Marchi, C., & Somerday, B. P. (2012). Technical reference for hydrogen compatibility of materials (SAND2012-7321). Sandia National Laboratories. [Google Scholar]
  21. Somerday, B. P., & Sloane, C. S. (2019). Addressing hydrogen embrittlement of metals in the SAE J2579 fuel cell vehicle tank standard. [Google Scholar]
  22. McDougall, M. (2010). SAE J2579 validation testing program: Powertech final report (NREL/SR-5600-49867). National Renewable Energy Laboratory. [Google Scholar]
  23. Sloane, C. (2010). Test protocol for hydrogen storage systems in SAE J2579 and GTR requirements. U.S. Department of Energy. [Google Scholar]
  24. Dong, C., Liu, Y., Li, J., Bin, G., Zhou, C., Han, W., & Li, X. (2023). Hydrogen permeability of polyamide 6 used as liner material for Type IV on-board hydrogen storage cylinders. Polymers, 15(18), 3715. [Google Scholar]
  25. Smith, D. B. (2014). Lifecycle verification of tank liner polymers (ORNL/TM-2014/48). Oak Ridge National Laboratory. [Google Scholar]
  26. Li, X., Wang, Q., Wu, S., Wu, D., Cui, D., & Bai, J. (2025). Exploring the gas permeability of Type IV hydrogen storage cylinder liners: Research and applications. Materials, 18(13), 3127. [Google Scholar]
  27. Olsson, R., Cameron, C., Moreau, F., Marklund, E., Merzkirch, M., & Pettersson, J. (2024). Design, manufacture, and cryogenic testing of a linerless composite tank for liquid hydrogen. Applied Composite Materials, 31(4), 1131–1154. [Google Scholar]
  28. Mikroni, M., Koutsoukis, G., Vlachos, D., Kostopoulos, V., Vavouliotis, A., Trakakis, G., Athinaios, D., Nikolakea, C., & Zacharakis, D. (2024). Design, analysis, and testing of a Type V composite pressure vessel for hydrogen storage. Polymers, 16(24), 3576. [Google Scholar]
  29. Hughes, L. A., Somerday, B. P., Balch, D. K., & San Marchi, C. (2014). Hydrogen compatibility of austenitic stainless-steel tubing and orbital tube welds. International journal of hydrogen energy, 39(35), 20585–20590. [Google Scholar]
  30. International Organization for Standardization. (2002). Gas cylinders of composite construction — Specification and test methods — Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners (ISO Standard No. 11119-3:2002). https://www.iso.org/standard/28426.html [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.