EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 354 (2026) EPJ Web Conf., 354 (2026) 01001 References
Open Access
Issue
EPJ Web Conf.
Volume 354, 2026
19th Global Congress on Manufacturing and Management (GCMM 2025)
Article Number 01001
Number of page(s) 17
Section Advanced Materials, Composites, and Electromagnetic Structures
DOI https://doi.org/10.1051/epjconf/202635401001
Published online 02 March 2026
  1. Tri-Dung Ngo, Introduction to composite materials. In Composite and nanocomposite materials - from knowledge to industrial applications, IntechOpen (2020). DOI: 10.5772/intechopen.91285 [Google Scholar]
  2. Venugopal, A., Sudhagar, E., Rajamohan, V., Suresh, V., Karthikeyan, N., Naveen, J. The impact of graphene reinforcement on Z-pin and adhesively bonded composite for enhancing flexural strength of co-cured single lap joints. J. Adhesion. 2025, pp. 1–32. DOI: 10.1080/00218464.2025.2462223 [Google Scholar]
  3. Mohammed, R., Badruddin, I.A., Shaik, A.S., Kamangar, S. Experimental investigation on mechanical characterization of epoxy-E-glass-fiber-particulate reinforced hybrid composites. ACS Omega. 2024, 4: c01365. DOI: 10.1021/acsomega.4c01365 [Google Scholar]
  4. Venugopal, A., Sudhagar, P.E. Enhancing shear and flexural strength of single lap composite joints with a graphene nanoparticle-reinforced adhesive through a co-curing technique. Polymer. Compos. 2023. DOI: 10.1002/pc.28053 [Google Scholar]
  5. Venugopal, A., Sudhagar, P.E. Dual-scale reinforcement of co-cure single lap joints through graphene nanoparticles and CFRP Z-pin. Mater. Lett. 2024, 136833. DOI: 10.1016/i.matlet.2024.136833 [Google Scholar]
  6. Venugopal, A., Sudhagar, P.E. Enhancing shear strength of single lap composite adhesive joint with graphene nanoparticles and Z-pins reinforcement through co-curing technique. Tribol. Int. 2024, 109636. DOI: 10.1016/i.triboint.2024.109636 [Google Scholar]
  7. Gurusideswar, S., Srinivasan, N., Velmurugan, R., Gupta, N.K. Tensile response of epoxy and glass/epoxy composites at low and medium strain rate regimes. Procedia Eng. 2016, 173, 1325–1332. DOI: 10.1016/i.proeng.2016.12.148 [Google Scholar]
  8. Jumahat, A., Soutis, C., Abdullah, S.A., Kasolang, S. Tensile properties of nanosilica/epoxy nanocomposites. Procedia Eng. 2012, 41, 1584–1590. DOI: 10.1016/i.proeng.2012.07.361 [Google Scholar]
  9. Duleba, B., Dulebovâ, E., Spisâk, E. Simulation and evaluation of carbon/epoxy composite systems using FEM and tensile test. Procedia Eng. 2014, 96, 121–128. DOI: 10.1016/i.proeng.2014.12.099 [Google Scholar]
  10. Petrović, J.M., Bekrić, D.Ž., Vujičić, I.T., Dimić, I.D., Putić, S.S. Microstructural characterization of glass-epoxy composites subjected to tensile testing. Adv. Prod. Technol. 2013, 4, 151–160. DOI: 10.2298/APT1344151P [Google Scholar]
  11. Dhawale, V.P., Khobragade, V.B., Kulkarni, S.D. Synthesis and characterization of aluminium oxide (AI2O3) nanoparticles and its application in azodye decolourisation. Int. J. Environ. Chem. 2018, 01–13. DOI: 10.11648/j.ijec.20180201.13 [Google Scholar]
  12. Hassanpour, P., Panahi, Y., Ebrahimi-Kalan, A., Akbarzadeh, A. Biomedical applications of aluminium oxide nanoparticles. Micro Nano Lett. 2018, 5070. DOI: 10.1049/mnl.2018.5070 [Google Scholar]
  13. Kamaruzaman, F.F., Nuruzzaman, D.M., Ismail, N.M., Hamedon, Z., Iqbal, A.K.M.A., Azhari, A. Microstructure and properties of aluminium-aluminium oxide graded composite materials. Mater. Sci. Eng. A 2018, 012046. DOI: 10.1088/1757-899X7319/1/012046 [Google Scholar]
  14. Samardžija, M., Alar, V., Špada, V., Stojanovic, I. Corrosion behaviour of an epoxy resin reinforced with aluminium nanoparticles. Coatings 2022, 1500. DOI: 10.3390/coatings12101500 [Google Scholar]
  15. Liu, J.A., Dong, Z.Q., Zhu, X.Y., Sun, W.B., Huang, Z.Q. Flexural properties of lightweight carbon fiber/epoxy resin composite sandwiches with different fiber directions. Mater. Res. Express 2024, 4dc5. DOI: 10.1088/2053-1591/ac4dc5 [Google Scholar]
  16. V. Mallikarjuna, B. Ramanjaneyulu, C. Tirupathaiah, L. S. Rao, Operation speculate on epoxy resin reinforcement of aluminium oxide and silicon carbide on glass fiber laminate. (ResearchGate preprint) (2019). DOI: https://www.researchgate.net/publication/330466967 [Google Scholar]
  17. V. K. Srivastava, A. Verma, Mechanical behaviour of copper and aluminium particles reinforced epoxy resin composites. Mater. Sci. Appl. 5, 18–24 (2015). DOI: 10.5923/j.materials.20150504.02 10.2497/jjspm.15P-T13-08 [Google Scholar]
  18. N. Ozsoy, A. Mimaroğlu, M. Ozsoy, M. I. Ozsoy, Comparison of mechanical behaviour of carbon and glass fiber reinforced epoxy composites. Acta Phys. Pol. A 127, 1032–1034 (2015). DOI: 10.12693/APhysPolA.127.1032 [Google Scholar]
  19. J. Zhang, X. Liu, S. Zhang, W. Huo, Superior combination of strength and electrical conductivity in Cu/Al2O3 composite by introducing high-volume-fraction ultrafine grains. J. Jpn. Soc. Powder Metall. 15P-T13-08 (2023). DOI: 10.2497/jjspm.15P-T13-08 [Google Scholar]
  20. S. R. Beyanagari, K. Kalathur, V. Jagannati, L. P. Kumar, B. V. Siva, P. C. Govind, K. P. Kalyan, P. T. Kumar, Mechanical characteristics of sisal/Al2O3/epoxy hybrid composites. Mater. Sci. Appl. 5, 12–20 (2015). DOI: 10.5923/j.materials.20150504.02 [Google Scholar]
  21. G. Kabakçi, M. Kilinçel, G. B. Tezel, Thermo-mechanical behaviours investigation of nano-sized Al2O3, TiO2, and graphene nanoplatelet reinforced epoxy composites. Duzce Univ. J. Sci. & Tech., (2024). DOI: 10.29130/dubited.1422620 [Google Scholar]
  22. K. Bharadwaja, S. S. Rao, T. Babu Rao, Mechanical behaviour & analysis of epoxy/Al2O3 composites. Int. J. Eng. Adv. Tech. (IJEAT), (2020). DOI: 10.35940/ijeat.C5826.029320 [Google Scholar]
  23. R. Kumar, K. N. Bairwa, D. R. R. Reddy, Influence of addition of Al2O3 and SiC on tensile and flexural characteristics of epoxy/glass fiber hybrid polymer composite. Materials Today: Proceedings, (2023). DOI: 10.1016/j.matpr.2023.06.416 [Google Scholar]
  24. Z. Xu, C. Zhang, Y. Li, J. Zou, Y. Li, B. Yang, R. Hu, Q. Qian, Effect of the alumina micro-particle sizes on the thermal conductivity and dynamic mechanical property of epoxy resin. PLOS ONE, (2023). DOI: 10.1371/journal.pone.0292878 [Google Scholar]
  25. S. M. A. Nipu, M. Z. Rahman, S. S. Alam, B. Dev, Mechanical, thermal and morphological characterization of graphene/Al2O3-reinforced epoxy hybrid nanocomposites. Macromolecular Materials and Engineering, (2024). DOI: 10.1002/mame.202400180 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.