Open Access
| Issue |
EPJ Web Conf.
Volume 355, 2026
4th International Conference on Sustainable Technologies and Advances in Automation, Aerospace and Robotics (STAAAR 2025)
|
|
|---|---|---|
| Article Number | 02006 | |
| Number of page(s) | 11 | |
| Section | Additive Manufacturing and Sustainable Materials | |
| DOI | https://doi.org/10.1051/epjconf/202635502006 | |
| Published online | 03 March 2026 | |
- P. Verma, J. Ghose, G. Paul, V. Pandey, U. Pandey, Enhanced mechanical and tribological performance of AA2014-SiC metal matrix nanocomposites fabricated by a novel stir-ultrasonic-squeeze casting process. Int. J. Cast Met. 38(1), 21-35 (2025). https://doi.org/10.1080/13640461.2025.2469026 [Google Scholar]
- M. Ekpu, Sunday C. Ikpeseni, Characterising the Mechanical Properties of a Composite Material Comprising Aluminium and Silicon Carbide. Silicon. 16, 4333-4342 (2024). https://doi.org/10.1007/s12633-024-03006-8 [Google Scholar]
- D. Periyasamy, J. Duraisamy, Sami Al Obaid, V. Rathinavelu, Aluminium Alloy Nanocomposite Featured with Barium and Silicon Carbide Nanoparticles: Mechanical and Wear Studies. Silicon. 17, 1165-1176 (2025). https://doi.org/10.1007/s12633-025-03263-1 [Google Scholar]
- Huijie Zhang, Baoxin Zhang, Qiuzhi Gao, Jianling Song, Guoliang Han. A review on microstructures and properties of graphene-reinforced aluminum matrix composites fabricated by friction stir processing. J. Manuf. Process. 68(B), 126-135 (2021). https://doi.org/10.1016/j.jmapro.2021.07.023 [Google Scholar]
- L. Osunmakinde, T. B. Asafa, P. O. Agboola, M. O. Durowoju, A Systemic review of the influence of eco-friendly particles on hybrid composites synthesized via stir casting technique. Discov Mechanical Engineering 3, 32 (2024). https://doi.org/10.1007/s44245-024-00055-6 [Google Scholar]
- Aykut Çanakçı, Abdullah Hasan Karabacak, Müslim Çelebi, Serdar Özkaya, Kür¸sat Alp Arpacı. A Study on the Optimization of Nano-B₄C Content for the Best Wear and Corrosion Properties of the Al-Based Hybrid Nanocomposites. Arab J Sci Eng 49, 14625–14641 (2024). https://doi.org/10.1007/s13369-024-08736-w [Google Scholar]
- Müslim Çelebi, Onur Güler, Aykut Çanakçı, Hamdullah Çuvalcı. The effect of nanoparticle content on the microstructure and mechanical properties of ZA27-Al₂O₃-Gr hybrid nanocomposites produced by powder metallurgy. Journal of Composite Materials. 55(24), 3395-3408 (2021). https://doi.org/10.1177/00219983211015719 [Google Scholar]
- G. Rajan, A. Kumar, S. Mula, Influence of friction stir processing on wear behavior of nanosized SiC reinforced AA5083 nanocomposites developed by stir casting. J. Manuf. Process. 141, 1631-1649 (2025). https://doi.org/10.1016/j.jmapro.2025.03.065 [Google Scholar]
- P.S. Tile, B. Thomas. Effect of Load, Sliding Velocity, and Reinforcements on Wear Characteristics of Al7075-Based Composite and Nanocomposites Fabricated by Ultrasonic-Assisted Stir-Casting Technique. Inter Metal cast 18, 180-195 (2024). https://doi.org/10.1007/s40962-023-01006-9 [Google Scholar]
- P.K. Dinesh Kumar, S. Darius Gnanaraj. Characterization of Al‑Si Alloy Reinforced with B₄C and TiO₂ Nanoparticles. Silicon 16, 4437-4449 (2024). https://doi.org/10.1007/s12633-024-03012-w [Google Scholar]
- Sadanand Sarapure, B. P. Shivakumar, M. B. Hanamantraygouda, Investigation of Corrosion Behavior of SiC-Reinforced Al 6061/SiC Metal Matrix Composites Using Taguchi Technique. J Bio Tribo Corros. 6, 31 (2020). https://doi.org/10.1007/s40735-020-0328-3 [Google Scholar]
- K. N. Uday, K. Senthilraj, Rajamurugan Govindasamy, Prabu Krishnasamy, Study of NaCl Corrosion Behavior on SiC-Reinforced in Al 6061 and Al 5052 Metal Matrix Composites Using Taguchi’s Technique, SAE Technical Paper (2022). https://doi.org/10.4271/2022-28-0531 [Google Scholar]
- G. Perumal, N. Senthilkumar, Nithesh Naik, B. Deepanraj, Comparative assessment of the mechanical, tribological, and corrosion properties of Al/SiC/Al₂O₃ and Al/SiC/TiO₂ hybrid composites. Discov Appl Sci. 7, 237 (2025). https://doi.org/10.1007/s42452-025-06687-x [Google Scholar]
- S. Prathap Singh, M. Gerald Arul Selvan, P. Jose Aloysius, P. Ravichandran, K. Vinoth Babu, Effect of acidic solution and immersion duration on the corrosion behaviour of the aluminium 6061 alloy, Mater. Today Proc. (2023). https://doi.org/10.1016/j.matpr.2023.08.232 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.