Open Access
| Issue |
EPJ Web Conf.
Volume 357, 2026
International Conference on Advanced Materials and Characterization (ICAMC 2025)
|
|
|---|---|---|
| Article Number | 01013 | |
| Number of page(s) | 8 | |
| Section | Energy & Engineering Materials | |
| DOI | https://doi.org/10.1051/epjconf/202635701013 | |
| Published online | 10 March 2026 | |
- S. Ubertini and U. Desideri, Experimental performance analysis of an annular diffuser with and without struts. Experimental Thermal and Fluid Science 22, 183–195 (2000). [Google Scholar]
- V. Vassiliev, S. Irmisch, M. Claridge, and D. P. Richardson, Experimental and numerical investigation of the impact of swirl on the performance of industrial gas turbine exhaust diffusers. ASME Turbo Expo 2003, Atlanta, USA, 19–29 (2003). [Google Scholar]
- O. Sieker and J. R. Seume, Effects of rotating blade wakes on separation and pressure recovery in turbine exhaust diffusers. ASME Turbo Expo 2008, Berlin, Germany, 1921–1931 (2008). [Google Scholar]
- A. M. Pradeep, B. Roy, V. Vaibhav, and D. Srinuvasu, Study of gas turbine exhaust diffuser performance and its enhancement by shape modifications. ASME Turbo Expo 2010, Glasgow, UK, 1101–1110 (2010). [Google Scholar]
- M. Babu, R. K. Shukla, A. Maru, A. M. Pradeep, and B. Roy, Boundary layer control in turbine exhaust diffusers using casing injection and design modifications. ASME Turbo Expo 2012, Copenhagen, Denmark, 1069–1079 (2012). [Google Scholar]
- A. Hirschmann, S. Volkmer, M. Casey, and M. Montgomery, Hub extension in an axial gas turbine diffuser. ASME Turbo Expo 2012, Copenhagen, Denmark, 1229–1238 (2012). [Google Scholar]
- P. Schaefer, W. H. Hofmann, and P. Gieß, Multiobjective optimization for duct and strut design of an annular exhaust diffuser. ASME Turbo Expo 2012, Copenhagen, Denmark, 1679–1689 (2012). [Google Scholar]
- P. Channaveere and Y. A. Yogananda, Numerical investigation of a divergent exhaust diffuser of a gas turbine engine. International Journal of Innovations in Engineering Research and Technology 4(6), 31–41 (2017). [Google Scholar]
- R. Prakash, D. Christopher, and K. Kumarrathinam, CFD analysis of flow through a conical exhaust diffuser. International Journal of Research in Engineering and Technology 3(11), 239–248 (2014). [Google Scholar]
- B. Salim, Effect of geometrical parameters on the performance of wide angle diffusers. International Journal of Innovative Research in Science Engineering and Technology 2(9), 4178–4191 (2013). [Google Scholar]
- V. Chetan, D. V. Satish, and P. S. Kulkarni, Numerical investigations of PGT10 gas turbine exhaust diffuser using hexahedral dominant grid. International Journal of Engineering and Innovative Technology 3(1), 392–400 (2013). [Google Scholar]
- M. M. Venugopal and V. Somashekar, Design and analysis of annular exhaust diffuser for jet engines. International Journal of Innovative Research in Science Engineering and Technology 4(7), 5104–5112 (2015). [Google Scholar]
- P. Banakar and B. Basawaraj, Computational analysis of flow in afterburner diffuser mixer having different shapes of struts. International Journal of Engineering Research 3(6), 225–229 (2015). [Google Scholar]
- Sakthimurugan, V. and Yuvarajan, D.. A comprehensive assessment on recent advancements in spent fuel reprocessing and waste management: pioneering technologies for a sustainable nuclear future. Kerntechnik (2025). [Google Scholar]
- S. Baskar, J. Jayaprabakar, A. Raman, T. Surulivel Rajan, J. Aravind Kumar, U. Nalini Ramachandran, E. Balaji, P. Sambandam, P.K. Jisha & M. Ruban, Possible bio cathode materials for usage in microbial fuel cells towards energy generation and wastewater treatment to sustain environment: A review, Results in Engineering 25, 104161 (2025). [Google Scholar]
- A. Kumar, B. Rajesh, C. Senthil. Performance study and analysis of Al2O3 nanofluid under different flow conditions. International Journal of Thermal Sciences 85, 45–56 (2024). [Google Scholar]
- Raja, T., and Y. Devarajan. Thermal evaluation of porcelain filler particles in basalt fibre-reinforced polymer composites for thermal applications. Journal of Thermal Analysis and Calorimetry 149, 1–13 (2024). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.