EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 361 (2026) EPJ Web Conf., 361 (2026) 08001 References
Open Access
Issue
EPJ Web Conf.
Volume 361, 2026
ASPOWERCN 2024 – The 8th Joint Conference of Aerospace Propulsion and the 44th Aerospace Propulsion Technology Information Society (APTIS) Technical Conference
Article Number 08001
Number of page(s) 15
Section Piston Engine
DOI https://doi.org/10.1051/epjconf/202636108001
Published online 13 April 2026
  1. Pickett, B. M.; Burnette, P. F.; Wells, S. P.; Sullivan, P. D.; Hawk, J. R., Fire safety tests comparing synthetic jet and diesel fuels with JP-8. Fire Safety Journal 2011, 46 (3), 89–95. [Google Scholar]
  2. Boretti, A.; Jin, S.-H.; Zakis, G.; Brear, M.; Attard, W.; Watson, H.; Carlisle, H.; Bryce, W. Experimental and numerical study of an air assisted fuel injector for a DISI engine; 0148-7191; SAE Technical Paper: 2007. [Google Scholar]
  3. Wu, H.; Zhang, F.; Zhang, Z., Fundamental spray characteristics of air-assisted injection system using aviation kerosene. Fuel 2021, 286, 119420. [Google Scholar]
  4. Hu, J.; Liu, B.; Zhang, C.; Gao, H.; Zhao, Z.; Zhang, F.; Wang, Y., Experimental study on the spray characteristics of an air-assisted fuel injection system using kerosene and gasoline. Fuel 2019, 235, 782–794. [Google Scholar]
  5. Wu, H.; Wang, L.; Wu, Y.; Sun, B.; Zhao, Z.; Liu, F., Spray performance of air-assisted kerosene injection in a constant volume chamber under various in-cylinder GDI engine conditions. Applied Thermal Engineering 2019, 150, 762–769. [Google Scholar]
  6. Yu, S.; Si, H.; Chen, C.; Wang, S.; Japhet, J. J., Experimental investigation on the impact of air flow rates and back pressures on kerosene microscopic spray characteristics discharged from an air-assisted pressure-swirl atomizer. International Communications in Heat and Mass Transfer 2024, 151, 107247. [Google Scholar]
  7. Presser, C.; Gupta, A.; Semerjian, H., Dynamics of pressure-jet and air assist nozzle sprays Aerodynamic effects. In 24th Joint Propulsion Conference. [Google Scholar]
  8. Liao, B.; Zhang, F.; Chen, Z.; Qin, T.; Lin, X.; Guo, Y., Effect of injection strategy on an air-assisted direct injection aviation kerosene two-stroke engine. Applied Thermal Engineering 2023, 233, 121193. [Google Scholar]
  9. Zhao, J.; Ding, H.; Fu, L.; Bai, B.; Zhang, D.; Liu, J.; He, X., Energy analysis and research on injection control parameter influence mechanism of air assisted spray system. Fuel 2023, 346, 128204. [Google Scholar]
  10. Zhao, J.; Fu, L.; Ding, H.; Bai, B.; Zhang, D.; Liu, J.; He, X., Numerical simulation of working process and gas-liquid interaction mechanism of air assisted nozzle. International Journal of Multiphase Flow 2023, 164, 104453. [Google Scholar]
  11. Pan, H.; Xu, M.; Hung, D.; Lv, H.; Dong, X.; Kuo, T.-W.; Grover, R. O.; Parrish, S. E. Experimental investigation of fuel film characteristics of ethanol impinging spray at ultra-low temperature; 0148–7191; SAE Technical Paper: 2017. [Google Scholar]
  12. Park, Y.; Hwang, J.; Bae, C.; Kim, K.; Lee, J.; Pyo, S., Effects of diesel fuel temperature on fuel flow and spray characteristics. Fuel 2015, 162, 1–7. [Google Scholar]
  13. Hwang, J.; Park, Y.; Bae, C.; Lee, J.; Pyo, S., Fuel temperature influence on spray and combustion characteristics in a constant volume combustion chamber (CVCC) under simulated engine operating conditions. Fuel 2015, 160, 424–433. [Google Scholar]
  14. Zigan, L.; Shi, J.-M.; Krotow, I.; Schmitz, I.; Wensing, M.; Leipertz, A., Fuel property and fuel temperature effects on internal nozzle flow, atomization and cyclic spray fluctuations of a direct injection spark ignition–injector. International Journal of Engine Research 2013, 14 (6), 543–556. [Google Scholar]
  15. Park, J.; Jang, J. H.; Park, S., Effect of fuel temperature on heavy fuel oil spray characteristics in a common-rail fuel injection system for marine engines. Ocean Engineering 2015, 104, 580–589. [Google Scholar]
  16. Park, S. H.; Kim, H. J.; Suh, H. K.; Lee, C. S., Experimental and numerical analysis of spray-atomization characteristics of biodiesel fuel in various fuel and ambient temperatures conditions. International Journal of Heat and Fluid Flow 2009, 30 (5), 960–970. [Google Scholar]
  17. Pandey, R. K.; Rehman, A.; Sarviya, R. M., Impact of alternative fuel properties on fuel spray behavior and atomization. Renewable and Sustainable Energy Reviews 2012, 16 (3), 1762–1778. [Google Scholar]
  18. Kim, D.; Martz, J.; Violi, A., Effects of fuel physical properties on direct injection spray and ignition behavior. Fuel 2016, 180, 481–496. [Google Scholar]
  19. Fang, Y.; Zhang, K.; Ma, X.; Zhang, Y.; Xu, L.; Li, Y.; Shuai, S., Droplet Measurement of High-Pressure Liquid Ammonia Injection Using PDPA. SAE International: 2023. [Google Scholar]
  20. Zhang, Z.; Hao, Y.; Chen, Z., Kinematic viscosity characteristics of aviation jet fuel RP-3. Modern Machinery 2020, (01), 38–40. [Google Scholar]
  21. Fang, Y.; Ma, X.; Zhang, Y.; Li, Y.; Zhang, K.; Jiang, C.; Wang, Z.; Shuai, S., Experimental Investigation of High-Pressure Liquid Ammonia Injection under Non-Flash Boiling and Flash Boiling Conditions. Energies 2023, 16 (6), 2843. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.