EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 367 (2026) EPJ Web Conf., 367 (2026) 01003 References
Open Access
Issue
EPJ Web Conf.
Volume 367, 2026
Fifth International Conference on Robotics, Intelligent Automation and Control Technologies (RIACT 2026)
Article Number 01003
Number of page(s) 16
Section Robotics Design and Control
DOI https://doi.org/10.1051/epjconf/202636701003
Published online 29 April 2026
  1. Wu, J., Qian, X., & Wang, M. (2019). Advances in generative design for lightweight structures. Computer-Aided Design, 116, 102733. [Google Scholar]
  2. Ahmed, M. D., & Zafar, M., & Mohanta, J. (2020). Modeling and analysis of quadcopter F450 frame using additive manufacturing. International Journal of Mechanical Engineering and Technology, 11(5), 196–201. [Google Scholar]
  3. Buelow, P. V. (2002). Using evolutionary algorithms to aid designers of lightweight structural systems. Journal of Architectural Engineering, 8(4), 315–336. [Google Scholar]
  4. Sun, H., & Ma, L. (2020). Generative design and topology optimization for weight reduction in drone components. Structural and Multidisciplinary Optimization, 62(5), 1345–1356. [Google Scholar]
  5. Harish Doraiswamy, N., Ferreira, M., Lage, M., Wilson, L., Werner, H., Park, M., & Silva, C. (2015). Topology-based generative framework for optimized structure design. Computers & Structures, 158, 41–53. [Google Scholar]
  6. Oh, S., Kim, J., & Lee, H. (2019). Deep generative design: Integration of topology optimization and generative models for drone frame development. Journal of Mechanical Design, 141(12), 1–10. [Google Scholar]
  7. Conner, S., Wiest, T., & Seepersad, C. C. (2019). Evaluation of machine learning techniques in generative design and additive manufacturing. Journal of Mechanical Design, 141(5), 1–38. [Google Scholar]
  8. Bashu, A. (2020). Generative design for performance enhancement and weight reduction in unmanned aerial vehicle frames. Additive Manufacturing, 35, 101268. [Google Scholar]
  9. Stroia, M. D. (2020). Case studies on drone frame design using CAD and CAE techniques for additive manufacturing. Procedia Manufacturing, 46, 120–147. [Google Scholar]
  10. Buonamici, F., Carfagni, M., Furferi, R., & Governi, L. (2020). Generative design in 3D printing: an explorative study. Design Studies, 48, 144–155. [Google Scholar]
  11. Yi, J., Zeng, T., & Rong, J. (2014). Topology optimization for lightweight structures in UAV design. Structural Optimization Journal, 34(2), 215–223. [Google Scholar]
  12. Janssen, P. A. (2006). A generative evolutionary design method for digital creativity. Digital Creativity, 17, 49–63. [Google Scholar]
  13. Vlah, D., Žavbi, R., & Vukašinović, N. (2020). Evaluation of topology optimization and generative design tools for conceptual design. Computer-Aided Design, 43, 88–100. [Google Scholar]
  14. Meng, L., Zhang, W., Quan, D., & Gao, T. (2019). From topology optimization design to additive manufacturing: Today’s success and tomorrow’s roadmap. Computers & Structures, 234, 106–123. [Google Scholar]
  15. Shin, S., Goh, B., Oh, Y., & Chung, H. (2021). Topology optimization for additive manufacturing considering overhang and anisotropy. Additive Manufacturing, 47, 102268. [Google Scholar]
  16. Zhou, Y., Nomura, T., & Saitou, K. (2022). Anisotropic multicomponent topology optimization for additive manufacturing with build orientation design. Engineering Optimization, 54(6), 1024–1043. [Google Scholar]
  17. Almasri, W., Bettebghor, D., Ababsa, F., & Danglade, F. (2020). Generative design of mechanical structures through deep convolutional neural networks. Applied Sciences, 10(22), 8105. [Google Scholar]
  18. Coulthard, A., & Wang, X. (2021). Generative design and topology optimisation of products for additive manufacturing. Procedia CIRP, 100, 21–28. [Google Scholar]
  19. Stratasys Ltd. (2019). 3D printing for drones and UAV manufacturing. Stratasys Technical Report, 12, 45–51. [Google Scholar]
  20. Reddy, M., & Rao, P. (2020). Design and fabrication of optimized drone chassis using generative design approach. International Journal of Research and Analytical Reviews, 7(3), 451–456. [Google Scholar]
  21. Huang, L. (2020). Integrating deep learning with generative design and topology optimization for efficient additive manufacturing. AI in Design and Manufacturing, 6(2), 85–97. [Google Scholar]
  22. Park, J., & Kim, H. (2021). Structural optimization and additive manufacturing of UAV frames for improved performance. Journal of Manufacturing Processes, 68, 252–260. [Google Scholar]
  23. Mühlbauer, M. (2020). Generative design framework for aesthetic guidance in structural node design. Journal of Computational Design and Engineering, 7(4), 541–552. [Google Scholar]
  24. Li, C., Zhang, L., & Yu, H. (2018). Optimization of drone airframes using topology optimization and finite element analysis. Aerospace Science and Technology, 78, 188–198. [Google Scholar]
  25. Yan, X., & Wu, J. (2020). Additive manufacturing and generative design integration for high-performance structures. Additive Manufacturing Letters, 33, 101215. [Google Scholar]
  26. Yoon, S., & Lee, D. (2019). Structural and modal analysis of a 3D-printed quadcopter frame. International Journal of Mechanical and Production Engineering, 7(9), 112–117. [Google Scholar]
  27. Singh, R., & Sharma, S. (2020). Study of lightweight drone frame using generative design and FDM 3D printing. Materials Today: Proceedings, 28, 456–462. [Google Scholar]
  28. T. Rogers et al., “Material selection in polymer-based additive manufacturing,” Materials Science Reports, vol. 15, no. 2, pp. 80–91, 2021. [Google Scholar]
  29. Patel, H., & Shah, D. (2020). Optimization of quadcopter chassis using generative design and simulation. International Research Journal of Engineering and Technology, 7(5), 3156–3161. [Google Scholar]
  30. Rajan, R., & Thomas, P. (2022). Structural enhancement of UAV frames using lattice-based generative design. Procedia Manufacturing, 54, 320–327. Kaufui V Wong, Aldo Hernandez 2012 A Review of Additive Mnaufacturing 10.5402/2012/208760. [Google Scholar]
  31. Shahroz Khan, Muhammad Junaid Awan 2018 A Generative Design Technique for Exploring Shape Variations 38 712–724 [Google Scholar]
  32. M D Stroia, D E Mosteanu, I Virca, E Raduca, C Popescu, C Haţiegan 2020 Case studies for automotive components using CAD and CAE techniques 1426 012047 [Google Scholar]
  33. Burggräf, P., Pérez Martínez, A.R., Roth, H. et al. 2019 Quadrotors in factory applications: design and implementation of the quadrotor’s P-PID cascade control system 1 722 [Google Scholar]
  34. Hwang, K., & Jeon, Y. (2019). Optimization of 3D printed drone performance using multi-algorithm generative techniques. Engineering Optimization, 51(10), 1712–1724. [Google Scholar]
  35. Tao, R., & Yi, J. (2014). Continuum topology optimization considering global displacement constraints. Strojniski Vestnik, 60, 43–50. [Google Scholar]
  36. Sossnovik, I., & Oseledets, I. (2019). Neural networks for topology optimization. Structural and Multidisciplinary Optimization, 34, 215–223. [Google Scholar]
  37. Sivam, K. (2011). A practical generative design method. Computer-Aided Design, 43, 88–100. [CrossRef] [Google Scholar]
  38. Stroia, M. D., & Stan, G. (2021). Case study of UAV structure components using CAD and CAE techniques. Procedia Structural Integrity, 12, 14–22. [Google Scholar]
  39. Buonamici, F., Carfagni, M., Furferi, R., Governi, L., & Volpe, Y. (2020). Generative design: An explorative study for additive manufacturing. Explorative Design Review, 18, 144–155. [Google Scholar]
  40. Kim, J., Park, S., and Lee, D., “Generative design optimization of lightweight drone structures using finite element analysis,” Journal of Intelligent Manufacturing, vol. 33, no. 7, pp. 2013–2024, 2022. [Google Scholar]
  41. Mehta, R., and Patel, K., “Design and simulation of 3D printed drone frame using FDM technology,” International Journal of Advanced Engineering Research and Science, vol. 8, no. 5, pp. 211–217, 2021. [Google Scholar]
  42. Zhao, H., and Liu, P., “Topology optimization for lightweight UAV components manufactured by additive manufacturing,” Aerospace Science and Technology, vol. 96, pp. 105513, 2020. [Google Scholar]
  43. Singh, V., and Raj, P., “Generative design approach for multi-rotor drone chassis,” Procedia Computer Science, vol. 201, pp. 624–631, 2022. [Google Scholar]
  44. Ahn, S., and Park, H., “Study on optimization of quadcopter arm using 3D printing,” Materials Today: Proceedings, vol. 47, pp. 1645–1651, 2021. [Google Scholar]
  45. Gupta, A., and Sharma, R., “Structural and modal analysis of UAV frame using FEA and generative design,” International Journal of Engineering and Advanced Technology, vol. 10, no. 6, pp. 36–42, 2020. [Google Scholar]
  46. Kwon, Y., and Jeong, S., “Integration of topology optimization with generative algorithms for UAV structures,” Journal of Mechanical Design, vol. 143, no. 9, pp. 1–12, 2021. [Google Scholar]
  47. Choudhary, M., and Sahu, A., “Development of lightweight drone using PLA material and FDM technology,” International Journal of Mechanical and Production Engineering Research and Development, vol. 11, no. 3, pp. 57–64, 2021. [Google Scholar]
  48. Li, W., Chen, Y., and Wang, Q., “Additive manufacturing and generative design- based optimization for lightweight aerospace components,” Additive Manufacturing, vol. 28, pp. 559–568, 2019. [Google Scholar]
  49. Patel, N., and Joshi, D., “Generative design and analysis of UAV components using Autodesk Fusion 360,” Journal of Emerging Technologies and Innovative Research, vol. 8, no. 4, pp. 94–101, 2021. [Google Scholar]
  50. Yadav, R., and Singh, A., “Topology optimization of drone structures for additive manufacturing,” Procedia Structural Integrity, vol. 36, pp. 73–80, 2022. [Google Scholar]
  51. Varma, T., and Ramesh, K., “Enhancement of quadcopter frame performance through generative design,” International Journal of Innovative Technology and Exploring Engineering, vol. 9, no. 12, pp. 401–406, 2020. [Google Scholar]
  52. Gao, L., and Zhang, X., “Generative design-based framework for lightweight mechanical parts,” Computers & Industrial Engineering, vol. 149, pp. 106790, 2020. [Google Scholar]
  53. Banerjee, A., and Das, S., “Finite element and CFD-based optimization of quadcopter design,” Materials Today: Proceedings, vol. 58, pp. 241–248, 2022. [Google Scholar]
  54. Lee, C., and Kim, H., “AI-driven generative design for additive manufacturing of UAV components,” Engineering Applications of Artificial Intelligence, vol. 118, pp. 105657, 2023. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.