EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 370 (2026) EPJ Web Conf., 370 (2026) 01010 References
Open Access
Issue
EPJ Web Conf.
Volume 370, 2026
International Conference on Advanced Physics: Innovations for a Sustainable Future (IEMPHYS-26)
Article Number 01010
Number of page(s) 10
DOI https://doi.org/10.1051/epjconf/202637001010
Published online 29 May 2026
  1. Y. Liu, Y. Jiang, C. Guo, S. Deng, and H. Kong, Experimental Research on Machining Localization and Surface Quality in Micro Electrochemical Milling of Nickel-Based Superalloy, Micromachines 9, 402 (2018). [Google Scholar]
  2. S. Pan, B. Zhao, A. K. Balaji, Y. Qu, and Y. Yin, Perspective: revisiting surface roughness in electrochemical machining and the paradoxes, Surf. Sci. Technol. 2, 15 (2024). [Google Scholar]
  3. K. Sivakumar, J. Sai Prasanna Kumar, K. Loganathan, V. Mugendiran, T. Maridurai, and K. Suresh, Machining characteristics of silane-treated wheat husk biosilica in deionized water dielectric on EDM drilling of Ti-6Al-4 V alloy, Biomass Convers. Biorefinery 14, 199 (2024). [Google Scholar]
  4. C. Sun, Y. Wang, Y. Yang, Z. Yao, Y. Liu, Q. Wu, J. Yan, J. Yao, and W. Zhang, Study on the Effect of Electrolytes on Processing Efficiency and Accuracy of Titanium Alloy Utilizing Laser and Shaped Tube Electrochemical Machining, Materials (Basel). 17, 689 (2024). [Google Scholar]
  5. Z. Ge, M. Chen, W. Chen, and Y. Zhu, Study on Improving Electrochemical Machining Performances through Energy Conversion of Electrolyte Fluid, Coatings 14, 406 (2024). [Google Scholar]
  6. A. K. Sharma, N. Aravindan, K. M. J. Ignatia, F. O. Areche, G. B. Loganathan, A. H. Taha, P. Dwivedi, and R. K. Yellapragada, Hybrid multi criteria decision making methodology for improving sustainability of the manufacturing sector, Int. J. Interact. Des. Manuf. 19, 695 (2025). [Google Scholar]
  7. N. Lusi, A. Fiveriati, A. Afandi, I. Gusti Ngurah Bagus Catra Wedarma, H. Yuliandoko, M. Darsin, and S. Qutaba, Predictive Modelling on Machining Performance of ECDM Using Artificial Neural Network and Particle Swarm Optimization, Manuf. Technol. 23, 649 (2023). [Google Scholar]
  8. A. Chourasiya and C. M. Krishna, A novel approach of RSM-based TOPSIS-JAYA algorithm for optimization of ECM process parameters, J. Chinese Inst. Eng. 46, 628 (2023). [Google Scholar]
  9. M. K. Pradhan, Optimisation of EDM process for MRR, TWR and radial overcut of D2 steel: a hybrid RSM-GRA and entropy weight-based TOPSIS approach, Int. J. Ind. Syst. Eng. 29, 273 (2018). [Google Scholar]
  10. S. Vijayakumar, Optimization of friction stir welding parameters for dissimilar aluminium alloys using RSM-GRA and RSM-TOPSIS: Towards sustainable manufacturing in industry 4.0, Results Eng. 27, 107054 (2025). [Google Scholar]
  11. S. Maniraj and R. Thanigaivelan, Optimization of Electrochemical Micromachining Process Parameters for Machining of AMCs with Different % Compositions of GGBS Using Taguchi and TOPSIS Methods, Trans. Indian Inst. Met. 72, 3057 (2019). [Google Scholar]
  12. S. Lal, S. Kumar, Z. Khan, and A. Siddiquee, Multi-response optimization of wire electrical discharge machining process parameters for Al7075/Al 2 O 3/SiC hybrid composite using Taguchibased grey relational analysis, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 229, 229 (2015). [Google Scholar]
  13. Z. A. Khan, A. N. Siddiquee, N. Z. Khan, U. Khan, and G. A. Quadir, Multi Response Optimization of Wire Electrical Discharge Machining Process Parameters Using Taguchi based Grey Relational Analysis, Procedia Mater. Sci. 6, 1683 (2014). [Google Scholar]
  14. A. Perumal, C. Kailasanathan, B. Stalin, S. Suresh Kumar, P. R. Rajkumar, T. Gangadharan, G. Venkatesan, N. Nagaprasad, V. Dhinakaran, and R. Krishnaraj, Multiresponse Optimization of Wire Electrical Discharge Machining Parameters for Ti-6Al-2Sn-4Zr-2Mo (α-β) Alloy Using Taguchi-Grey Relational Approach, Adv. Mater. Sci. Eng. 2022, 1 (2022). [CrossRef] [Google Scholar]
  15. R. Świercz, D. Oniszczuk-Świercz, and T. Chmielewski, Multi-Response Optimization of Electrical Discharge Machining Using the Desirability Function, Micromachines 10, 72 (2019). [Google Scholar]
  16. A. Babbar, A. Sharma, and P. Singh, Multi-objective optimization of magnetic abrasive finishing using grey relational analysis, Mater. Today Proc. 50, 570 (2022). [Google Scholar]
  17. N. Manikandan, S. Kumanan, and C. Sathiyanarayanan, Multiple performance optimization of electrochemical drilling of Inconel 625 using Taguchi based Grey Relational Analysis, Eng. Sci. Technol. an Int. J. 20, 662 (2017). [Google Scholar]
  18. X. Zhang, X. Li, H. Wang, and T. Zhang, Multi-objective optimization of machining parameters during milling of carbon-fiber-reinforced polyetheretherketone composites using grey relationalanalysis, Adv. Mech. Eng. 12, 2020. [Google Scholar]
  19. H. P. Pydi, A. S. V. Prasad, M. N. S. Sri, C. Prasad, A. Peyyala, B. B. Jarso, D. Gupta, and V. Sivasundar, Experimental Study and Optimization of Electrochemical Machining of Al-7Si-0.4Mg Alloy Using NaNO 3 and NaOH Electrolytes, Adv. Mater. Sci. Eng. 2025, 2025. [Google Scholar]
  20. L. Nie, H. Wu, X. Huang, and Z. Jin, Study on the preparation method of electrochemical grinding electrolyte for 9Cr18Mo bearing steel and the performance of oxide film, Mater. Manuf. Process. 40, 1223 (2025). [Google Scholar]
  21. D. J and H. P, Investigation of electrochemical machining on SS304 using NaCl and NaNo 3 as electrolyte, Mater. Manuf. Process. 37, 1790 (2022). [Google Scholar]
  22. S. Kalyanakumar, C. Munikumar, S. Govind Nair, and S. Shaju, Application of multi response optimization of drilling setting main process parameter using VIKOR approach, Mater. Today Proc. 45, 6099 (2021). [Google Scholar]
  23. M. Gangil and M. K. Pradhan, Optimization the machining parameters by using VIKOR Method during EDM process of Titanium alloy, Mater. Today Proc. 5, 7486 (2018). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.