EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 370 (2026) EPJ Web Conf., 370 (2026) 01011 References
Open Access
Issue
EPJ Web Conf.
Volume 370, 2026
International Conference on Advanced Physics: Innovations for a Sustainable Future (IEMPHYS-26)
Article Number 01011
Number of page(s) 8
DOI https://doi.org/10.1051/epjconf/202637001011
Published online 29 May 2026
  1. B. Prakash, S. Sivananthan, and V. Vÿayan, Investigation on mechanical properties of A16061 alloy-Multiwall carbon nanotubes reinforced composites by powder metallurgy route, Mater. Today Proc. 37, 336 2021. [Google Scholar]
  2. S. Vijayakumar, Optimization of friction stir welding parameters for dissimilar aluminium alloys using RSM-GRA and RSM-TOPSIS: Towards sustainable manufecturing in industry 4.0, Results Eng. 27, 107054 2025. [Google Scholar]
  3. Y. Liu, D. Fang, B. Zhu, Y. Wang, S. Li, and Y. Zhang, Modeling of Isothermal Dissolution of Precipitates in a 6061 Aluminum Alloy Sheet during Solution Heat Treatment, Metals (Basel). 11, 1234 2021. [Google Scholar]
  4. P. Gopalakrishnaiah, C. Srinivasa Rao, and V. Sivasundar, Effect of rolling on grain refinement, mechanical performance, and corrosion resistance of precipitation-hardened AA7075 alloys with 1 wt-% Sc, Can. Metall. Q. 1 2025. [Google Scholar]
  5. R. V. Sadanand, S. Y. Nayak, and A. Prabhu, Development of sustainable AA6061 hybrid composites reinforced with silica sand and copper for high-performance applications, Results Eng. 27, 106651 (2025). [Google Scholar]
  6. G. Perumal, Μ. Geetha, R. Asokamani, and N. Alagumurthi, Wear studies on plasma sprayed A12O3-40 wt% 8YSZ composite ceramic coating on TÌ-6A1-4V alloy used for biomedical applications, Wear 311, 101 2014. [Google Scholar]
  7. M. Rouhi, Μ. Moazami-Goudarzę and M. Ardestani, Comparison of effect of SiC and MoS2 an wear behavior of Al matrix composites, Trans. Nonferrous Met. Soc. China 29, 11692019. [Google Scholar]
  8. L Sabry, M. A. Ghafaar, A.-H. I. Mourad, and A. H. Idrisi, Stir casted SiC-Gr/A16061 hybrid composite tribological and mechanical properties, SN Appi. Sci. 2, 943 2020. [Google Scholar]
  9. P. Beldar, S. KadHiane, P. Kavale, and V. Khond, Microstructural and tribological investigation of B4C-reinforced A16061 composites: insights from SEM and wear analysis, J. Eng. Appi. Sci. 72, 189 2025. [Google Scholar]
  10. G. Perumai, N. Senthilkumar, N. Naik, and B. Deepanrąj, Comparative assessment of the mechanical, tribological, and corrosion properties of A1/SÌC/A12O3 and A1/SÌC/TÌO2 hybrid composites, Discov. Appi. Sci. 7, 237 (2025). [Google Scholar]
  11. D. Mummoorthi, Μ. Rajkumar, and S. Ganesh Kumar, Advancement and characterization of Al-Mg-Si alloy using reinforcing materials of Fe2O3 and B4C composite produced by stir casting method, J. Meeh. Sci. Technol. 33, 3213 2019. [Google Scholar]
  12. G. B. Veeresh Kumar, R. Pramod, R. Hari Kiran Reddy , P. Ramu, B. Kunaal Kumar, P. Madhukar, M. Chavali, F. Mohammad, and S. K. Khiste, Investigation of the Tribological Characteristics of Aluminum 6061-Reinforced Titanium Carbide Metal Matrix Composites, Nanomaterials 11, 3039 (2021). [Google Scholar]
  13. T. S. Kumar, S. Shalini, Μ. Ramu, and T. Thankachan, Characterization of ZrC reinforced AA6061 alloy composites produced using stir casting process, J. Meeh. Sci. Technol. 34, 143 2020. [Google Scholar]
  14. L. F. Demisie, E. Getnet, G. A. Taddese, R. G. Rengjah, T. N. Takele, Y. G. Ayalew, and E. A. Berihun, Experimental analysis on the mechanical properties of A16061 based hybrid composite reinforced with silicon carbide, bagasse fly ash and aloe vera ash, Discov. Appi. Sci. 6, 491 (2024). [Google Scholar]
  15. R. Venkatesh, A. Sharma, K. Karthik, R. Kumar, P. K. K. Vivekananda, M. Vinayagam, M. E. M. Soudagar, S. Al Obaid, and S. A. Alharbi, Hybrid Reinforcement Actions on Microstructural, Physical and Mechanical Properties of Magnesium Alloy Composite by Two-Step Stir Casting Process, Int. J. Met. 19, 3316 (2025). [Google Scholar]
  16. S. Thanikodi, Effect of graphene nanoparticle reinforcement on the mechanical properties of ZE41/graphene nanocomposites prepared by stir casting route, Int. J. Adv. Manuf Technol. 136, 15 2025. [Google Scholar]
  17. A. Kareem, J. A. Qudeiri, A. Abdudeen, T. Ahammed, and A. Ziout, A Review on AA 6061 Metal Matrix Composites Produced by Stir Casting, Materials (Basel). 14, 175 2021. [Google Scholar]
  18. A. Thirugnanasambandam, N. Joy, A. Mariadhas, K. S. S. Raja, A. K. Tiwari, and B. V. S. Krishna, Study on Mechanical Properties of Aluminium 6061/SiC Composite by Single and Double Stir Casting Process, in 2020, p. 080016. [Google Scholar]
  19. N. Kumar Maurya, M. Maurya, A. K. Srivastava, S. P. Dwivedi, A. Kumar, and S. Chauhan, Investigation of mechanical properties of Al 6061/SiC composite prepared through stir casting technique, Mater. Today Proc. 25, 755 2020. [Google Scholar]
  20. G. B. Veeresh Kumar, C. S. P. Rao, and N. Selvaraj, Studies on mechanical and dry sliding wear of A16061-SÌC composites, Compos. Part B Eng. 43, 1185 (2012). [Google Scholar]
  21. O. O. Barah, I. Bori, A. J. Otaru, and H. Khan, Improving microstructural properties, mechanical performance, and processability of flux-engineered stir cast boron carbide (B 4 C)-reinforced AA6061 composites with K2T1F6 integration, J. Taibah Univ. Sci. 19, 2025. [Google Scholar]
  22. S. Gudipudi, S. Nagamuthu, K. S. Subbian, and S. P. R. Chilakalapalli, Enhanced mechanical properties of AA6061-B4C composites developed by a novel ultra-sonic assisted stir casting, Eng. Sci. Technol. an Int. J. 23, 1233 2020. [Google Scholar]
  23. P. Ranjitha, D. S. Bavan, B. S. Ąjaykumar, T. H. Raju, and S. Udayashankar, Investigation of Mechanical Properties of A16061-SÌC-B4C Composites Produced by Using Stir Casting Method, J. Inst. Eng. Ser. D 106, 339 2025. [Google Scholar]
  24. S. S. Murugan, V. Jegan, and Μ. Velmurugan, Mechanical Properties of SiC, A12O3 Reinforced Aluminium 6061-T6 Hybrid Matrix Composite, J. Inst. Eng. Ser. D 99, 71 (2018). [Google Scholar]
  25. B. C. Kandpal, J. Kumar, and H. Singh, Fabrication and characterisation of A12O3/aluminium alloy 6061 composites fabricated by Stir casting, Mater. Today Proc. 4, 2783 (2017). [Google Scholar]
  26. S. Sivananthan, V. Rajalaxman Reddy, and C. Samson Jerold Samuel, Preparation and evaluation of mechanical properties of 6061A1-A12O3 metal matrix composites by stir casting process, Mater. Today Proc. 21, 713 2020. [Google Scholar]
  27. M. Nagaral, V. Auradi, and S. A. Kori, Microstructure and Mechanical Properties of A16061-Graphite Composites Fabricated by Stir-Casting Process, Appi. Mech. Mater. 766-767, 308 (2015). [Google Scholar]
  28. S. B. Boppana, S. Dayanand, B. V. Murthy, M. Nagaral, A. Telagu, V. Kumar, and V. Auradi, Development and Mechanical Characterisation of A16061-A12O3-Graphene Hybrid Metal Matrix Composites, J. Compos. Sci. 5, 155 2021. [Google Scholar]
  29. E. Subba Rao and N. Ramanaiah, Influence of Heat Treatment on Mechanical and Corrosion Properties of Aluminium Metal Matrix composites (AA 6061 reinforced with MoS 2 ), Mater. Today Proc. 4, 11270 (2017). [Google Scholar]
  30. C. Satish, K. Vijay Kumar, S. Prasad, P. Sai Kiran, O. S. Asiq Rahman, P. Singh, S. Indupuri, R. Shrivastava, S. Μ. Pandey, and A. K. Keshri, Effect of A1203 and MoS2 reinforcement on microstructure, mechanical, and wear properties of plasma sprayed aluminium hybrid composite coating, Mater. Today Commun. 36, 106640 2023. [Google Scholar]
  31. T. Anand, L. Ranganathan, G. Prabaharan, and A. Srithar, Mechanical behaviour of A16061 hybrid nanocomposites reinforced with nano alumina and molybdenum disulfide, Mater. Today Proc. 2023. [Google Scholar]
  32. A. ChinnamahammadBhasha and K. Balamurugan, Studies on A1606Inanohybrid Composites Reinforced with SiO2/3x% of TiC-a Agro-Waste, Silicon 14, 13 (2022). [Google Scholar]
  33. K. N. Chethan, L. G. Keni, N. H. Padmaraj, A. Dias, and R. Jain, Fabrication and Mechanical characterization of aluminium 6061. with conventionally prepared bamboocharcoal, Mater. Today Proc. 5, 3465 2018. [Google Scholar]
  34. N. Subramani, R. Haridass, R. Krishnan, D. Loganathan, and N. Manikandan, Mechanical characterization of aluminium 6061 hybrid metal matrix composites, Mater. Today Proc. 65, 3959 2022. [Google Scholar]
  35. M. Marachakkanavar, S. J. Sanjey, D. N. Korade, and K. R. Jagtap, Experimental Investigation ofMechanical Properties of A16061 Reinforced with Iron ore, Mater. Today Proc. 4, 82192017. [Google Scholar]
  36. Μ. Milic Jankovic, J. Svorcan, and I. Atanasovska, Development of an Artificial Neural NetworkBased Tool for Predicting Failures in Composite Laminate Structures, Biomimetics 10, 520 2025. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.