Open Access
| Issue |
EPJ Web Conf.
Volume 371, 2026
9th International Congress on Thermal Sciences (AMT’2026)
|
|
|---|---|---|
| Article Number | 02001 | |
| Number of page(s) | 7 | |
| Section | Materials and Energy Storage Systems | |
| DOI | https://doi.org/10.1051/epjconf/202637102001 | |
| Published online | 22 May 2026 | |
- Y. Bahammou, M. Kouhila, Z. Tagnamas, Hygroscopic behavior of water absorbed by capillarity and stabilization of a bio-composite building material: Clay reinforced with Chamarrops humilis fibers, Int. Commun. Heat Mass Transf. 135, 106077 (2022). https://doi.org/10.1016/j.icheatmasstransfer.2022.106077 [Google Scholar]
- M. Wang, Z. Lu, Study on the hygroscopic performances of poplar wood fiber biomass brick, Int. Commun. Heat Mass Transf. 135, 106063 (2022). https://doi.org/10.1016/j.icheatmasstransfer.2022.106063 [Google Scholar]
- S. Liuzzi, F. Stefanizzi, P. Stefanizzi, Hygrothermal behaviour and relative humidity buffering of clay composites in a Mediterranean climate, Build. Environ. 61, 82-92 (2013). https://doi.org/10.1016/j.buildenv.2012.12.006 [Google Scholar]
- C. Maalouf, R. El Hage, M. Lachi, Hygrothermal evaluation of hemp concrete at wall and room scales, J. Build. Phys. 44, 183-224 (2020). https://doi.org/10.1177/1744259119896380 [Google Scholar]
- A. Brunet, F. Collet, P. Lenormand, Thermal and moisture transfer in hemp-lime composites under real conditions, Constr. Build. Mater. 357, 129377 (2022). https://doi.org/10.1016/j.conbuildmat.2022.129377 [Google Scholar]
- M. Boumhaout, M. Boukendil, L. El Moutaouakil, Thermomechanical characterization of bio-composite mortar reinforced with date palm fibers, Constr. Build. Mater. 135, 241-250 (2017). https://doi.org/10.1016/j.conbuildmat.2016.12.217 [Google Scholar]
- F. Collet, J. Chamoin, S. Pretot, Porous structure and water vapour sorption of hempbased materials, Constr. Build. Mater. 22, 1271-1284 (2008). https://doi.org/10.1016/j.conbuildmat.2007.01.018 [Google Scholar]
- N. Saneinejad, P. Marechal, T. Defraeye, Energy and moisture balance modeling for low-energy buildings, Energy Build. 43, 2020-2028 (2011). https://doi.org/10.1016/j.enbuild.2011.04.008 [Google Scholar]
- J.M.P.Q. Delgado, F.A.N. Silva, A.C. Lopes, Can moisture buffer performance be estimated from sorption kinetics?, J. Build. Phys. 29, 281-299 (2006). https://doi.org/10.1177/1744259106062568 [Google Scholar]
- K. Trabelsi, A. Mansour, F. Collet, Hygrothermal performance of clay-hemp bio-based materials under dynamic conditions, Energy Build. 215, 109889 (2020). https://doi.org/10.1016/j.enbuild.2020.109889 [Google Scholar]
- M. Benkhaled, A. Benazzouk, F. Cremonesi, Sensitivity analysis of hygrothermal transfer model HAM in bio-based hemp concrete material, Int. Commun. Heat Mass Transf. 132, 105884 (2022). https://doi.org/10.1016/j.icheatmasstransfer.2022.105884 [Google Scholar]
- A. Amziane, F. Collet, Cement-Based Composites with Plant Particles, Springer, Cham (2017). https://doi.org/10.1007/978-94-024-1031-0 [Google Scholar]
- K. Bezzarga, M. Bouhelal, S. Khelifi, Hygrothermal and mechanical behavior of natural fiber-reinforced earth blocks, Constr. Build. Mater. 390, 131687 (2023). https://doi.org/10.1016/j.conbuildmat.2023.131687 [Google Scholar]
- M. Karoglou, A. Bakolas, K. Moropoulou, Water sorption isotherms of some building materials, Dry. Technol. 23, 289-303 (2005). https://doi.org/10.1081/DRT-200047948 [Google Scholar]
- N.M.M. Ramos, J.M.P.Q. Delgado, V.P. de Freitas, Application of different transient sorption methods to evaluate moisture diffusion coefficients, J. Build. Phys. 35, 251266 (2012). https://doi.org/10.1177/1744259111418331 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.