Open Access
| Issue |
EPJ Web Conf.
Volume 371, 2026
9th International Congress on Thermal Sciences (AMT’2026)
|
|
|---|---|---|
| Article Number | 02002 | |
| Number of page(s) | 13 | |
| Section | Materials and Energy Storage Systems | |
| DOI | https://doi.org/10.1051/epjconf/202637102002 | |
| Published online | 22 May 2026 | |
- M. Samykano, Advancing battery thermal management: Future directions and challenges in nano-enhanced phase change materials-based systems, Prog. Mater. Sci. 148, 101388 (2025). https://doi.org/10.1016/j.pmatsci.2024.101388 [Google Scholar]
- G. Alva, L. Liu, X. Huang, G. Fang, Thermal energy storage materials and systems for solar energy applications, Renew. Sustain. Energy Rev. 68, 693 (2017). https://doi.org/10.1016/j.rser.2016.10.021 [Google Scholar]
- M. Errebii, A. Mourid, A. Charraou, M. El Alami, M. Kriraa, Performance optimization of a thermoelectric generator using metal foam/phase change material composites and fins, Energy 334, 137806 (2025). https://doi.org/10.1016/j.energy.2025.137806 [Google Scholar]
- Z. Elmaazouzi, M. E. Alami, H. Agalit, E. G. Bennouna, M. E. Ydrissi, A Comparative Analysis of the Performance of LHTES Systems-Case Study: Cylindrical Exchanger with and without Annular Fins, AIP Conf. Proc., 020073 (2019). https://doi.org/10.1063/1.5117000 [Google Scholar]
- Z. Elmaazouzi, M. El Alami, A. Gounni, E. G. Bennouna, Thermal energy storage with phase change materials: Application on coaxial heat exchanger with fins, Mater. Today Proc. 27, 3095 (2020). https://doi.org/10.1016/j.matpr.2020.03.653 [Google Scholar]
- S. Ahmed, A. Abderrahmane, A. M. Saeed, K. Guedri, A. Mourad, O. Younis, T. Botmart, N. A. Shah, Melting enhancement of PCM in a finned tube latent heat thermal energy storage, Sci. Rep. 12, 11521 (2022). https://doi.org/10.1038/s41598-022-15797-0 [Google Scholar]
- S. Abdollahi, M. Arnasa, F. Talati, S. Ranjbar, S. Faramarzi, Enhanced thermal performance of cylindrical energy storage tanks with radial and longitudinal fins using phase change materials: A comparative numerical study, Results Eng. 26, 105081 (2025). https://doi.org/10.1016/j.rineng.2025.105081 [Google Scholar]
- Z. Elmaazouzi, M. El Alami, H. Agalit, E. G. Bennouna, Performance evaluation of latent heat TES system-case study: Dimensions improvements of annular fins exchanger, Energy Rep. 6, 294 (2020). https://doi.org/10.1016/j.egyr.2019.08.059 [Google Scholar]
- H. E. Abdellatif, S. A. Khan, N. Fatima, M. A. Aljohani, A. Arshad, A. Belaadi, A. Alhushaybari, Enhancing latent heat storage: Impact of geometric modifications, S-shaped enclosure walls, and L-shaped fins, Mater. Today Sustain. 30, 101114 (2025). https://doi.org/10.1016/j.mtsust.2025.101114 [Google Scholar]
- F. L. Rashid, A. F. Khalaf, A. Alizadeh, M. A. Al-Obaidi, S. Salahshour, C. K. Chan, Numerical investigation of the effect of the number of fins on the phase-change material melting inside a shell-and-tube cylindrical thermal energy storage, Case Stud. Therm. Eng. 60, 104754 (2024). https://doi.org/10.1016/j.csite.2024.104754 [Google Scholar]
- M. Errebii, F. Z. Laktaoui Amine, Y. El Alami, A. Chaabi, A. Mourid, M. El Alami, Y. Yao, Synergistic enhancement and stabilization of thermoelectric generator (TEG) performance using finned metal foam-PCM composites, Energy 348, 140538 (2026). https://doi.org/10.1016/j.energy.2026.140538 [Google Scholar]
- M. Javidan, A. Hasibi, Z. Asadi, D. D. Ganji, Heat storage by melting the organic material of Paraffin RT50 in a heat exchanger with eccentric pipes, J. Energy Storage 54, 105280 (2022). https://doi.org/10.1016/j.est.2022.105280 [Google Scholar]
- M. Errebii, A. Mourid, M. El Alami, Y. Yao, Evaluation and optimization of thermal exchange performance for a metal foam/phase change material composite integrated into a heat sink, J. Energy Storage 99, 113211 (2024). https://doi.org/10.1016/j.est.2024.113211 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.