EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 376 (2026) EPJ Web Conf., 376 (2026) 02004 References
Open Access
Issue
EPJ Web Conf.
Volume 376, 2026
6th International Conference on Recent Advances in Mechanical Engineering and Nanomaterials (ICRAMEN 2026)
Article Number 02004
Number of page(s) 10
Section Production and Manufacturing Processes
DOI https://doi.org/10.1051/epjconf/202637602004
Published online 01 July 2026
  1. S. Hassanifard, A. Hashemi, A. Varvani-Farahani, M. Ghiasvand, The effect of the friction stir welding tool shape on tensile properties of welded Al 6061-T6 joints. Mater. Today Commun. 31, 103457 (2022). https://doi.Org/10.1016/j.mteomm.2022.W3457 [Google Scholar]
  2. K. Fuse, V. Badheka, Bobbin tool friction stir welding: A review. Sci. Technol. Weld. Join. 24, 277–304 (2019). https://doi.org/10.1080/13621718.2018.1553655 [Google Scholar]
  3. Z. Ma, A. Feng, D. Chen, J. Shen, Recent advances in friction stir welding/processing of aluminum alloys: Microstructural evolution and mechanical properties. Crit. Rev. Solid State Mater. Sci. 43, 269–333 (2018). https://doi.org/10.1080/10408436.2017.1358145 [CrossRef] [Google Scholar]
  4. Y. Li, D. Sun, W. Gong, Effect of tool rotational speed on the microstructure and mechanical properties of bobbin tool friction stir welded 6082-T6 aluminum alloy. Metals 9, 894 (2019). https://doi.org/10.3390/met9080894 [Google Scholar]
  5. R.S. Mishra, Z.Y. Ma, Friction stir welding and processing. Mater. Sci. Eng. R Rep. 50, 1–78 (2005). https://doi.org/10.1016/j.mser.2005.07.001 [Google Scholar]
  6. W. Hou, Y. Ding, G. Huang, N. Huda, L.H.A. Shah, Z. Piao, Y. Shen, Z. Shen, A. Gerlich, The role of pin eccentricity in friction stir welding of Al-Mg-Si alloy sheets: Microstructural evolution and mechanical properties. Int. J. Adv. Manuf. Technol. 121, 7661–7675 (2022). [Google Scholar]
  7. T. Ding, H.G. Yan, J.H. Chen, W.J. Xia, B. Su, Effect of welding speed on microstructure and mechanical properties of Al-Mg-Mn-Zr-Ti alloy sheet during friction stir welding. Trans. Nonferrous Met. Soc. China 31, 3626–3642 (2021). [Google Scholar]
  8. G. Nagesh, N. Rao, K. Kanishk, K.M. Anurag, N. Abhinav, Investigation of mechanical properties on non-ferrous alloys of copper and brass joints made by friction stir welding. IOP Conf. Ser. Mater. Sci. Eng. 1057, 012062 (2021). [Google Scholar]
  9. N.T. Moghaddam, A. Rabiezadeh, A. Khosravifard, L. Ghalandari, Self-reacting friction stir welding of Al-Zn-Mg aluminum alloy. Arab. J. Sci. Eng. 47, 9085–9098 (2022). [Google Scholar]
  10. S. Kilic, F. Ozturk, M.F. Demirdogen, A comprehensive literature review on friction stir welding: Process parameters, joint integrity, and mechanical properties. J. Eng. Res. 13, 122–130 (2025). [Google Scholar]
  11. B. Abnar, S. Gashtiazar, M. Javidani, Friction stir welding of non-heat treatable Al alloys: Challenges and improvement opportunities. Crystals 13, 576 (2023). https://doi.org/10.3390/cryst13040576 [Google Scholar]
  12. A. Madarapu, J. Babu, M. Venkata Ramana, Optimisation of pressure and depth of forming for box shaped super plastic forming of AZ31B magnesium alloy. Mater. Today Proc. 58(1), 205–211 (2022). https://doi.org/10.1016/j.matpr.2022.01.445 [Google Scholar]
  13. J. Babu, A. Madarapu, T. Sunny, M. Venkata Ramana, Multi characteristic optimisation of high speed machining of GFRP laminate by hybrid Taguchi desirability approach. Mater. Today Proc. 58(1), 238–243 (2022). https://doi.org/10.1016/i.matpr.2022.02.097 [Google Scholar]
  14. K. Ramakanth, P. Yugandhar Babu, G. Venkata Jagadeesh, Subhashish Dey, G. Taraka Naga Veerendra, Prediction and optimization of process parameters of friction stir welded aluminum 6063 alloy, Journal of Alloys and Compounds Communications. 8, 100105 (2025). [Google Scholar]
  15. A. Kumar, P. Pankaj, P. Biswas, A.G. Rao, Finite element analysis and experimental investigation on effect of process parameters in plasma-assisted friction stir welding of low carbon steel. Trans. Indian Inst. Met. 75, 2559–2579 (2022). [Google Scholar]
  16. B. Meyghani, M. Awang, S. Emamian, A comparative study of finite element analysis for friction stir welding application. ARPN J. Eng. Appl. Sci. 11, 12984–12989 (2016). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.