EPJ Web of Conferences
Volume 45, 2013EFM12 – Experimental Fluid Mechanics 2012
|Number of page(s)||6|
|Published online||09 April 2013|
Characteristics of the pipe junction with 2.4 cross-section area ratio for the case of the flow division
Brno University of Technology, Faculty of Mechanical Engineering, Energy Institute, Victor Kaplan Department of Fluid Engineering, Technická 2896/2, 616 69, Czech Republic
a e-mail: firstname.lastname@example.org
There are presented characteristics of the pipe junction for the case of the flow division in this paper. The pipe junction consists of one straight pipe, with the diameter 50 mm and one adjacent pipe with diameter 32 mm. The characteristics have been measured for five different angles of the adjacent pipe.
© Owned by the authors, published by EDP Sciences, 2013
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Initial download of the metrics may take a while.