EPJ Web Conf.
Volume 140, 2017Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media
|Number of page(s)||4|
|Published online||30 June 2017|
Experimental and DEM analysis of the dissipation involved in the collision of a boulder with a substratum
1 Univ. Grenoble Alpes, 3SR, F-38000, Grenoble, France
2 IMSRN, Ingénierie des Mouvements de Sol et Risques Naturels, 680 Rue Aristides Bergès, 38330 Montbonnot, France
* e-mail: email@example.com
Published online: 30 June 2017
Experiments and numerical analysis were both carried out to evaluate the amount of energy dissipated during the rebound between single boulder (concrete made blocks with many varied shapes) and a soft or stiff substratum. A high speed camera made it possible to analyze the collision kinematics and to determine the role played by different features such as the incident axial/angular velocities, the boulder shapes, the impact configuration and the substratum type, on the amount of dissipated energy. A three-dimensional discrete element code was used to simulate the experiments by accounting for the actual shape of the boulder and some dissipation mechanisms. The comparison between the experimental and numerical trajectories allowed for an physical interpretation of the dissipation mechanisms and an identification of a set of parameters to be introduced in the simulations. That way, the predictive ability of the discrete model of rock avalanche can be improved by including in-situ measurements.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.