| Issue |
EPJ Web Conf.
Volume 213, 2019
EFM18 – Experimental Fluid Mechanics 2018
|
|
|---|---|---|
| Article Number | 02069 | |
| Number of page(s) | 5 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/201921302069 | |
| Published online | 28 June 2019 | |
https://doi.org/10.1051/epjconf/201921302069
Mathematical simulation of temperature influence on pressure drop at pump suction line
VŠB-Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Hydromechanics and Hydraulic Equipment, 708 33 Ostrava, Czech Republic
* Corresponding author: tomas.polasek@vsb.cz
Published online: 28 June 2019
The article is focused on mathematical simulation of the temperature influence on the pressure drop at the pump suction line. It is evaluated pressure drop depending on mineral oil flow rate. The courses of individual dependencies are determined by mathematical simulation using the ANSYS CFD computing software. The temperature affects significantly physical properties of the flowing mineral oil. In a paper is also described the experimental measurement of a mineral oil sample and determination of its physical properties depending on temperature.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.