| Issue |
EPJ Web Conf.
Volume 269, 2022
EFM19 – Experimental Fluid Mechanics 2019
|
|
|---|---|---|
| Article Number | 01047 | |
| Number of page(s) | 4 | |
| Section | Contributions | |
| DOI | https://doi.org/10.1051/epjconf/202226901047 | |
| Published online | 24 October 2022 | |
https://doi.org/10.1051/epjconf/202226901047
Simulation of temperature influence on shear stress during mineral oil flow
VŠB -Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Hydromechanics and Hydraulic Equipment, 708 00 Ostrava, Czech Republic
* Corresponding author: tomas.polasek@vsb.cz
Published online: 24 October 2022
The article is focused on the mathematical simulation of temperature influence on the shear stress during the mineral oil flow. The rotary rheometer is used to measure the shear stress. It works on the principle of torque measurement when the spindle rotates in the container with the measured liquid. The rotating spindle together with the container forms the hollow cylinder which is filled by measured oil. The shear stress is evaluated for the various oil temperatures. The software ANSYS Fluent is used to evaluate the partial numerical simulations. The experimental evaluation of the oil physical properties depending on the temperature is described in the article.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.