EPJ Web Conf.
Volume 215, 2019EOS Optical Technologies
|Number of page(s)||2|
|Section||Manufacturing, Tolerancing and Testing of Optical Systems (MOS) – Session 6|
|Published online||10 September 2019|
Final Figuring of Optical Components Surfaces Considering Deformations Introduced by Support System
JSC Lytkarino Optical Glass Factory (LZOS), Lytkarino, 140080, Parkovaya 1, Moscow region, Russia
* Corresponding author: email@example.com
Published online: 10 September 2019
Membrane-pneumatic support systems for mirror mounting are often used at JSC LZOS during working surface tests while producing of large-dimensioned optical components of astronomical and space application. However, in some cases, it is necessary to support the mirror by glued interface elements. In such case, the difference in the surface shape between the standard and the technological support, which is considered during figuring, is calculated by means of modelling.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.