| Issue |
EPJ Web Conf.
Volume 248, 2021
V International Conference “Modeling of Nonlinear Processes and Systems“ (MNPS-2020)
|
|
|---|---|---|
| Article Number | 04009 | |
| Number of page(s) | 6 | |
| Section | Workshop on Advanced Materials Processing and Smart Manufacturing | |
| DOI | https://doi.org/10.1051/epjconf/202124804009 | |
| Published online | 26 April 2021 | |
https://doi.org/10.1051/epjconf/202124804009
Model of the Ultimate Stress State of the Coated Tool Cutter Material
1
Moscow State Technological University “STANKIN”, RU-127055, Moscow, Russia.
2
IDTI RAS, Moscow, Russia.
3
Belarusian State University, BL-220030, Minsk, Belarus.
* Corresponding author: dr.a.veres@yandex.ru
Published online: 26 April 2021
The article proposes a model of the ultimate stress state of the material of the coated tool cutter. It is found that with an increase in the fracture toughness of a tool in connection with the material ductility the machining accuracy deteriorates due to arising elastic-plastic vibrations of the tool cutter. In case when no ultimate stress state is reached, that is, a tool operates in the elastic region, then an alternating stress distribution diagram is realized for the tool cutter at the beam approximation. Therefore, in addition to the frictional vibrations, arising from the interaction between the tool cutter and a workpiece, the elastic vibrations can arise, which affects the machining accuracy and the service life of the coated tool cutter. The use of coatings makes it possible not only to increase the wear resistance of cutting tools, but also to transform the stress distribution diagrams of the normal σN and tangential τγ contact stresses acting on the rake face of the cutting tool. In particular, it is possible to control the length of the total contact area between the chips and the tool rake face.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.