| Issue |
EPJ Web Conf.
Volume 255, 2021
EOS Annual Meeting (EOSAM 2021)
|
|
|---|---|---|
| Article Number | 03002 | |
| Number of page(s) | 2 | |
| Section | Topical Meeting (TOM) 3- Optical System Design, Tolerancing and Manufacturing | |
| DOI | https://doi.org/10.1051/epjconf/202125503002 | |
| Published online | 18 November 2021 | |
https://doi.org/10.1051/epjconf/202125503002
Experimental results from face and lateral fine grinding of fused silica and BK7 using metal and resin bonded tools
Ernst-Abbe University of Applied Sciences Jena, Carl-Zeiss-Promenade 2, 07745 Jena, Germany
* Corresponding author: christian.schulze@eah-jena.de
Published online: 18 November 2021
The experimental setup shall compare face grinding with lateral grinding in a single processing step using fused silica and BK7 as materials. Resin and metal bonded tools are used in face and lateral grinding strategies. The paper presents the results in order to deepen the knowledge about those grinding technologies and to further improve the properties of fabricated components. Furthermore, the results confirm, that ultra-fine grinding is a technology, which can be used to process inorganic non-metallic materials with high quality surfaces with a low roughness and high flatness in a low processing time.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.