| Issue |
EPJ Web Conf.
Volume 287, 2023
EOS Annual Meeting (EOSAM 2023)
|
|
|---|---|---|
| Article Number | 09016 | |
| Number of page(s) | 2 | |
| Section | Topical Meeting (TOM) 9- Applications in Optics and Photonics | |
| DOI | https://doi.org/10.1051/epjconf/202328709016 | |
| Published online | 18 October 2023 | |
https://doi.org/10.1051/epjconf/202328709016
Development and application of additive manufactured fine grinding tools for the processing of fused silica
1 Ernst-Abbe University of Applied Sciences Jena, Carl-Zeiss-Promenade 2, 07745 Jena, Germany
2 Günter Effgen GmbH, Am Teich 3-5, 55756 Herrstein, Germany
3 Technische Universität Ilmenau, Ehrenbergstrasse 29, 98693 Ilmenau, Germany
* Corresponding author: sebastian.henkel@eah-jena.de
Published online: 18 October 2023
The development or the improvement of production processes are necessary aspects, in order to enhance the quality and efficiency in optical manufacturing. This paper presents an approach to manufacture fine grinding tools in a very flexible and efficient way. A new filament composed of polyamide, ZrO2 particles and diamond grains is developed and used in an additive manufacturing process for tool fabrication. The resulting tools are successfully applied in an ultra-fine grinding process on fused silica samples.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.