| Issue |
EPJ Web Conf.
Volume 277, 2023
21st Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating (EC21)
|
|
|---|---|---|
| Article Number | 04007 | |
| Number of page(s) | 5 | |
| Section | Technology | |
| DOI | https://doi.org/10.1051/epjconf/202327704007 | |
| Published online | 23 February 2023 | |
https://doi.org/10.1051/epjconf/202327704007
Gyrotron anode voltage control in EAST ECRH system
Institute of Plasma Physics Chinese Academy of Sciences, 350 Shushanhu Rd., Hefei 230031, China
* Corresponding author: xuweiye@ipp.cas.cn
† Corresponding author: xhd@ipp.cas.cn
Published online: 23 February 2023
Four diode-type gyrotrons are used in the EAST ECRH system now. The anode is one of the main components of the gyrotron. We can control the output power of the gyrotron by changing the anode voltage. An anode voltage control system for ASIPP anode power supplies was developed based on the ethernet CompactDAQ chassis NI-cDAQ-9185. The anode voltage can be controlled up to 30 kV, and the maximum current is 100 mA. The maximum modulation frequency is 5 kHz at a 50% duty cycle.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.