Issue |
EPJ Web Conf.
Volume 287, 2023
EOS Annual Meeting (EOSAM 2023)
|
|
---|---|---|
Article Number | 04028 | |
Number of page(s) | 2 | |
Section | Topical Meeting (TOM) 4- Nanophotonics | |
DOI | https://doi.org/10.1051/epjconf/202328704028 | |
Published online | 18 October 2023 |
https://doi.org/10.1051/epjconf/202328704028
Bispectral Optical Cavity based on Twin Metamirrors
1 Technical University of Braunschweig, Institute for Semiconductor Technology, Hans-Sommer-Str. 66, Braunschweig, Germany
2 CAVITY technologies UG, Wilhelmsgarten 3, Braunschweig, Germany
3 Laboratory for Emerging Nanometrology (LENA), Langer Kamp 6a/b, Braunschweig, Germany
4 Physikalisch-Technische Bundesanstalt, Bundesallee 100, Braunschweig, Germany
* e-mail: liam.shelling-neto@tu-braunschweig.de
Published online: 18 October 2023
Metasurfaces, the two-dimensional variant of metamaterials, manipulate light in unique ways, opening up a whole new world of optical functionalities, ranging from optical imaging to quantum optics. High reflectivities and tailored phase profiles could allow such metamirrors to outperform conventional multilayer mirrors for high-precision optical interferometry due to their low thermal noise. Here, we design twin metamirrors with theoretical reflectivities of > 99.9 % at 1064 nm and 1550 nm. These mirrors can be implemented in bispectral low-noise optical cavities, which would reduce the number of cavities or can be used as a transfer cavity for quantum experiments like atomic clocks.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.