Open Access
EPJ Web of Conferences
Volume 94, 2015
DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Article Number 01017
Number of page(s) 6
Section Experimental Techniques
Published online 07 September 2015
  1. Sarva S.S., Deschanel S., Boyce M.C., Chen W. (2007) Stress–strain behavior of a polyurea and a polyurethane from low to high strain rates. Polymer (Guildf) 48:2208–2213. [CrossRef] [Google Scholar]
  2. Chen W., Zhang B., Forrestal M.J. (1999) A split Hopkinson bar technique for low-impedance materials. Exp Mech 39:81–85 [CrossRef] [Google Scholar]
  3. Song B., Chen W. (2003) One-Dimensional Dynamic Compressive Behavior of EPDM Rubber. J Eng Mater Technol 125:294. [CrossRef] [Google Scholar]
  4. Shergold O.A., Fleck N.A., Radford D. (2006) The uniaxial stress versus strain response of pig skin and silicone rubber at low and high strain rates. Int. J. Impact Eng. 32:1384–1402. [CrossRef] [Google Scholar]
  5. Roland C.M., Twigg J.N., Vu Y., Mott P.H. (2007) High strain rate mechanical behavior of polyurea. Polymer (Guildf) 48:574–578. [CrossRef] [Google Scholar]
  6. Nie X., Song B., Ge Y., et al. (2008) Dynamic Tensile Testing of Soft Materials. Exp Mech 49:451–458. [CrossRef] [Google Scholar]
  7. Pierron F., Sutton M.a., Tiwari V. (2010) Ultra High Speed DIC and Virtual Fields Method Analysis of a Three Point Bending Impact Test on an Aluminium Bar. Exp Mech 51:537–563. [CrossRef] [Google Scholar]
  8. Moulart R., Pierron F., Hallett S., Wisnom M. (2011) Full-Field Strain Measurement and Identification of Composites Moduli at High Strain Rate with the Virtual Fields Method. Exp Mech 51:509–536. [Google Scholar]
  9. Pierron F., Forquin P. (2012) Ultra-High-Speed Full-Field Deformation Measurements on Concrete Spalling Specimens and Stiffness Identification with the Virtual Fields Method. Strain 48:388–405. [CrossRef] [Google Scholar]
  10. Pierron F., Zhu H., Siviour C. (2014) Beyond Hopkinson's bar. Philos Trans R Soc A Math Phys Eng Sci 372:20130195. [Google Scholar]
  11. Pierron F., Grédiac M. (2012) The virtual fields method?: extracting constitutive mechanical parameters from full-field deformation measurements (Springer, New York) [Google Scholar]
  12. Ogden R.W. (1972) Large Deformation Isotropic Elasticity – On the Correlation of Theory and Experiment for Incompressible Rubberlike Solids. Proc R Soc London A Math Phys Sci 326:565–584 [CrossRef] [Google Scholar]
  13. ABAQUS (2011) ABAQUS 6.11 analysis user's manual. Abaqus 6.11 Doc. [Google Scholar]
  14. Promma N., Raka B., Grédiac M., et al. (2009) Application of the virtual fields method to mechanical characterization of elastomeric materials. Int J Solids Struct 46:698–715. [CrossRef] [Google Scholar]
  15. Palmieri G., Sasso M., Chiappini G., Amodio D. (2011) Virtual Fields Method on Planar Tension Tests for Hyperelastic Materials Characterisation. Strain 47:196–209. [CrossRef] [Google Scholar]
  16. Russell B.P., Karthikeyan K., Deshpande V.S., Fleck N. a. (2013) The high strain rate response of Ultra High Molecular-weight Polyethylene: From fibre to laminate. Int J Impact Eng 60:1–9. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.