Open Access
Issue
EPJ Web of Conferences
Volume 94, 2015
DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Article Number 03002
Number of page(s) 6
Section Biomechanics
DOI https://doi.org/10.1051/epjconf/20159403002
Published online 07 September 2015
  1. J. Widder, C. Perhala, and J. Rascoe, “Caseless, Variable Velocity Systems for Precision Non-Lethal Fires to beyond 100 Meters. Part-II: Terminal effects Study, Selection of Projectile Parameters,” AMMTIAC-WST IAC Journal vol. 1, pp. 13–16 (2003)
  2. J.M. Widder, D.J. Butz, and J.M. Milosh, “Assessing the Blunt Trauma Potential of Free Flying Projectiles for Development and Safety Certification of Non-Lethal Impactors,” Battelle Columbus Operations, Columbus, OH 43201, USA (1997)
  3. B. Koene, F. Id-Boufker, and A. Papy, “Kinetic non-lethal weapons,” Netherlands annual review of military studies, pp. 9–24 (2008)
  4. (2011, 15/02/2015). X1006 Sponge Round (Point), http://www.globalsecurity.org/military/systems/munitions/40-nl.htm
  5. (2015, 15/02/2015). Defnse Technology eXact iMpact Sponge Round, 40 mm [Electronic]. Available: http://www.chiefsupply.com/defense-technology-exact-impact-sponge-round-40mm.html
  6. S. Johnson. (2010, February 1, 2015). Taser XREP Up Close (and pricing!). TFB – The Firearms Blog. Available: http://www.thefirearmblog.com/blog/2010/02/10/taser-xrep-up-close-and-pricing/
  7. N.M. Thota, J.A. Eepaarachchi, and K.T. Lau, “Develop and validate a biomechanical surrogate of the human thorax using corrugated sheets: a feasibility study,” in Proceedings of the 7th Australasian Congress on Applied Mechanics (ACAM 7), (2012)
  8. N. Thota, J. Epaarachchi, and K.T. Lau, “Development and validation of a thorax surrogate FE model for assessment of trauma due to high speed blunt impacts,” Journal of Biomechanical Science and Engineering, vol. 9, pp. JBSE0008–JBSE0008 (2014) [CrossRef]
  9. N. Thota, “Development and Validation of a Mechanical Thorax Surrogate for the Evaluation of the Blunt Trauma Due to Ballistic Impacts” Doctor of Engineering, Centre of Excellence in Engineered Fibre Composites, University of Southern Queensland, Australia (To be published)
  10. G. Slik, G. Vogel, V. Chawda, and D. Automotive, “Material model validation of a high efficient energy absorbing foam,” in Proceedings of the 5th LS-DYNA Forum (2006)
  11. A. Oukura, C. Robbe, N. Nsiampa, and A. Papy, “Comparison of the lethality of different kinetic energy non-lethal projectiles using a new French assessment approach for head impacts,” presented at the 27th International symposium on ballistics Freiburg, Germany (2013)
  12. D.H. Lyon, “Development of a 40mm nonlethal catridge,” Defense Technology Federal Laboratories Research Journal, pp. 64–78 (1997)
  13. D.H. Lyon, C.A. Bir, and B.J. Patton, “Injury Evaluation Techniques for Non-Lethal Kinetic Energy Munitions,” DTIC Document (1999)
  14. C. Bir, D. Viano, and A. King, “Development of biomechanical response corridors of the thorax to blunt ballistic impacts,” J Biomech, vol. 37, pp. 73–9 Jan. (2004) [CrossRef] [PubMed]
  15. C.A. Bir, “The evaluation of blunt ballistic impacts of the thorax,” Doctor of Philosophy, Biomedical Engineering, Wayne State University, Detroit, Michigan, USA (2000)
  16. N.M. Thota, J.A. Eepaarachchi, and K.T. Lau, “Effect of energy absorbing mechanisms on the blunt thoracic trauma caused by ballistic impacts,” in Proceedings of the 8th Australasian Congress on Applied Mechanics (ACAM 8), Melbourne Convention Centre, Melbourne, Victoria, Australia (2014)
  17. N.M. Thota, J.A. Eepaarachchi, and K.T. Lau, “Evaluation of the blunt thoracic trauma due to baseball impacts - Review of the blunt criterion,” in Proceedings of the 8th Australasian Congress on Applied Mechanics (ACAM 8), Melbourne Convention Centre, Melbourne, Victoria, Australia (2014)
  18. N.M. Thota, J.A. Eepaarachchi, and K.T. Lau, “Viscous criterion and its relation with the projectile-thorax energy interactions,” in Proceedings of the 8th Australasian Congress on Applied Mechanics (ACAM 8), Melbourne Convention Centre, Melbourne, Victoria, Australia (2014)
  19. F. Pan, S. Quander, and Z. Ma, “Use of material models for elastomer foams in ABAQUS and LS-DYNA,” in Constitutive Models for Rubber IV – Austrell & Kari (eds). vol. IV, A. Kari, Ed., ed London: Taylor & Francis Group, 2005, pp. 593–597

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.