Open Access
Issue
EPJ Web Conf.
Volume 248, 2021
V International Conference “Modeling of Nonlinear Processes and Systems“ (MNPS-2020)
Article Number 04011
Number of page(s) 5
Section Workshop on Advanced Materials Processing and Smart Manufacturing
DOI https://doi.org/10.1051/epjconf/202124804011
Published online 26 April 2021
  1. N. Baroiu, D. Boazu, C. Vasilache, T. Virgil, Appl. Mech. Mater, 371, 509-513 (2013) [Google Scholar]
  2. H. Jung-Fa, D. Psang, Int. J. Mach. Tools Manuf. 42, 1181-1193 (2002) [Google Scholar]
  3. N. Baroiu, V. Teodor, S. Berbinishi, N. Oancea, Proc. IN-TECH, (2011) [Google Scholar]
  4. H. Jung-Fa, Int. J. Mach. Tools Manuf., 45 (7–8), (2005) [Google Scholar]
  5. L. Xiong, H. Shi, Y. Chen, ISAAT 9, 493-499 (2006) [Google Scholar]
  6. P. Pivkin, A. Ershov, A. Nadykto, IEEE (FarEastCon, Vladivostok, Russia, 2020) [Google Scholar]
  7. L. Xiong, H. Shi, Y. Chen, Chin. Mech. Eng., 18, 1165-1167 (2007) [Google Scholar]
  8. N. Baroiu, N. Berbinschi, Fascicola suplimentara. 58(72), 31-34 (2013) [Google Scholar]
  9. P. Pivkin, V. Grechishnikov, A. Ershov, A. Nadykto, Proc. SPIE 11540 (Advanced Manufacturing Technologies for Microand Nanosystems in Security and Defence III, 2020) [Google Scholar]
  10. J. Hsieh, Int. J. Adv. Manuf. Technol., 45, 967–977 (2005) [Google Scholar]
  11. S.N. Grigoriev, V.D. Gurin, M.A. Volosova, N.Y. Cherkasova, Materwiss. Werksttech, 44, 790-796 (2013) [Google Scholar]
  12. B. Nicusor, T. Virgil, B. Silviu, O. Nicolae, Adv. Mat. Res., 1036, 259-264 (2012). [Google Scholar]
  13. H. Shi, [A Study on Curved Edge Drills. In: Metal Cutting Theory], Springer, Cham, (2018) [Google Scholar]
  14. Y.E. Petukhov, N.V. Kolesov, S.Y. Yurasov, Russ. Eng. Res., 34, 374–380 (2014). [Google Scholar]
  15. S.N. Grigoriev, V.I. Teleshevskii, Meas. Tech., 54, 744–749 (2011) [Google Scholar]
  16. S.N. Grigoriev, M.P. Kozochkin, P.M. Pivkin, IEEE (FarEastCon, Vladivostok, Russia, 2020) [Google Scholar]
  17. S.N. Grigoriev, O.V. Sobol, V M. Beresnev, et al., J. Frict. Wear, 35, 359–364 (2014). [Google Scholar]
  18. S.P. Radzevich, Florida: CRC Press., 738 (2014). [Google Scholar]
  19. T.-R. Lin, J. Mater. Process. Technol., 127(1), 493-499 (2002) [Google Scholar]
  20. F. Tang, J. Bai, X. H. Wang, Int. J. Adv. Manuf. Technol., 73 (5-8), 659-667 (2014). [Google Scholar]
  21. D. Livia, P. Dan, N. Brındas, M. Calin, R. Johannes, Int. J. Adv. Manuf. Technol., 83 (9-12), 2111–2127 (2015) [Google Scholar]
  22. S.N. Grigoriev, V.A. Grechishnikov, M.A. Volosova, X. Jiang, P.M. Pivkin, Mater. Sci. Eng. C, 971, 2 (2020) [Google Scholar]
  23. B. Nicuşor, B. Silviu, T. Virgil, O. Nicoale, Tech. Mach. Build, 2012, 17-26 (2012) [Google Scholar]
  24. C. Fetecau, N. Oancea, F. Stan, J. Mater. Process.Technol. 209(7), 3460-3468 (2009) [Google Scholar]
  25. S.N. Grigoriev, V.A. Sinopalnikov, M.V. Tereshin, V.D. Gurin, Meas. Tech., 55, (2012) [Google Scholar]
  26. S. Barnes, P. Bhudwannachai, A. Dahnel, Proc. ASME, 2B, (2013). [Google Scholar]
  27. V.V. Kuzin, S.N. Grigoriev, M.A. Volosova, J. Frict. Wear, 36(1), 40, (2015) [Google Scholar]
  28. A.V. Gusarov, S.N. Grigoriev, M.A. Volosova, Y.A. Melnik, A. Laskin, D.V. Kotoban, A.A. Okunkova, J. Mater. Process. Technol., 261, 213 (2018) [Google Scholar]
  29. R.S. Khmyrov, S.N. Grigoriev, A.A. Okunkova, A.V. Gusarov, Phys. Procedia, 56, 345 (2014) [Google Scholar]
  30. S.N. Grigoriev, G.M. Martinov, Procedia CIRP, 46, 525 (2016) [Google Scholar]
  31. S.N. Grigoriev, D.A. Masterenko, V.I. Teleshevskii, P.N. Emelyanov, Meas. Tech, 55(11), 1311 (2013) [Google Scholar]
  32. V.A. Grechishnikov, Y.E. Petukhov, P.M. Pivkin, Parts. Meas. Tech., 58, 848–853 (2015) [Google Scholar]
  33. S.N. Grigoriev, M.A. Volosova, A.A. Okunkova, S.V. Fedorov, K. Hamdy, P.A. Podrabinnik, P.M. Pivkin, M.P. Kozochkin, A.N. Porvatov, J. Manuf. Mater. Process., 4, 96 (2020) [Google Scholar]
  34. S.N. Grigoriev, M.A. Volosova, A.A. Okunkova, S.V. Fedorov, K. Hamdy, P.A. Podrabinnik, P.M. Pivkin, M.P. Kozochkin, A.N. Porvatov, Technologies., 8, 49 (2020) [Google Scholar]
  35. S.N. Grigoriev, G.M. Martinov, Procedia CIRP, 1(1), 238 (2012) [Google Scholar]
  36. M. Volosova, S. Grigoriev, A. Metel, A. Shein, Coatings, 8, 287, (2018) [Google Scholar]
  37. A.S. Metel, V.P. Bolbukov, M.A. Volosova, S.N. Grigoriev, Yu.A. Melnik, Instrum. Exp. Tech., 57(3), 345, (2014) [Google Scholar]
  38. M.A. Volosova, S.N. Grigor’ev, V.V. Kuzin, Refract. Ind. Ceram., 55, 565, (2015) [Google Scholar]
  39. M.A. Volosova, S.N. Grigor’ev, V.V. Kuzin, Refract. Ind. Ceram., 56, 197, (2015) [Google Scholar]
  40. M.A. Volosova, S.N. Grigor’ev, V.V. Kuzin, Refract. Ind. Ceram., 55, 487, (2015) [Google Scholar]
  41. V.V. Kuzin, S.N. Grigoriev, M.A. Volosova, J. Frict. Wear, 35(6), 505, (2014) [Google Scholar]
  42. V.V. Kuzin, S.N. Grigor’ev, M.A. Volosova, Refract. Ind. Ceram., 54, 376, (2014) [Google Scholar]
  43. S. Berbinschi, N. Baroiu, T. Virgil, N. Oancea, New technologies in manufacturing, (2011) [Google Scholar]
  44. S.N. Grigoriev, M.A. Volosova, A.A. Okunkova, S.V. Fedorov, K. Hamdy, P.A. Podrabinnik, ... , A.N. Porvatov, J. Manuf. Mater. Process., 4(3), 96 (2020) https://doi.org/10.3390/jmmp4030096 [Google Scholar]
  45. P.M. Pivkin, A.B. Nadykto, V.A. Grechishnikov, M.A. Volosova, I.V. Minin, S.N. Grigoriev, Emerging Imaging and Sensing Technologies for Security and Defence V; and Advanced Manufacturing Technologies for Micro-and Nanosystems in Security and Defence III, 11540, 115401G (2020) https://doi.org/10.1117/12.2574391 [Google Scholar]
  46. S.N. Grigoriev, V.A. Grechishnikov, M.A. Volosova, X. Jiang, P.M. Pivkin, IOP Conference Series: Materials Science and Engineering, 971(2), 022065 (2020) DOI:10.1088/1757-899X/971/2/022065 [Google Scholar]
  47. P.M. Pivkin, V.A. Grechishnikov, A.A. Ershov, A.B. Nadykto, Emerging Imaging and Sensing Technologies for Security and Defence V; and Advanced Manufacturing Technologies for Microand Nanosystems in Security and Defence III, 11540, 1154014 (2020) https://doi.org/10.1117/12.2574392 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.