Open Access
Issue |
EPJ Web Conf.
Volume 286, 2023
European Conference on Neutron Scattering 2023 (ECNS 2023)
|
|
---|---|---|
Article Number | 03007 | |
Number of page(s) | 12 | |
Section | Instrumentation | |
DOI | https://doi.org/10.1051/epjconf/202328603007 | |
Published online | 09 October 2023 |
- G. Nowak et al., J. Appl. Phys. 117, 034901 (2015) [CrossRef] [Google Scholar]
- F. Piscitelli, et al., J. Instr. 13, P05009 (2018) [CrossRef] [Google Scholar]
- European Patent Application 2 997 174 (14.07.2014) [Google Scholar]
- European Patent Application 3 662 306 (10.03.2021) [Google Scholar]
- G. Charpak, et al., Nucl. Instrum. Meth. 62, 262 (1968) [CrossRef] [Google Scholar]
- F. Sauli, “Principles of Operation of Multiwire Proportional and Drift Chambers”, Lecutres given in the Academic Training Programme of CERN, Geneva (1977) [Google Scholar]
- https://www.ill.eu/de/neutrons-for-society/neutron-technology/detectors [Google Scholar]
- Su-Ann Chong et al., Nucl. Instrum. Meth. A, 1039, 167052 (2022) [CrossRef] [Google Scholar]
- J.-F. Moulin et al., Journal of Large-Scale Research Facilities, 1, A9 (2015) [CrossRef] [Google Scholar]
- K. Toh et. al., Journal of Physics: Conference Series, 528, 012045 (2014) [CrossRef] [Google Scholar]
- K.H. Andersen et al., Nucl. Instrum. Meth. A, 957, 163402 (2020) [CrossRef] [Google Scholar]
- M. O. Klein, Ph.D.-Thesis, Ruprecht Karls Universität, Heidelberg, (2000) [Google Scholar]
- G. Mauri et al., EPJ Techniques and Instrumentation, 6:3 (2019) [CrossRef] [Google Scholar]
- R. Arnaldi, et al., Nucl. Instrum. Methods Phys. Res., Sect. B 213, 284–288 (2004) [CrossRef] [Google Scholar]
- J. H. Coon, Phys. Rev. 75, 1355 (1949) [CrossRef] [Google Scholar]
- J. A. BistlineJr., The Rev. Sci. Instr. 19, 12 (1948) [Google Scholar]
- G. F. Knoll, “Radiation Detection and Measurement”, 4th ed. John Wiley & Sons, p. 534 (2010) [Google Scholar]
- D. A. Shea and D. Morgan, Report No. R41419, (2010) [Google Scholar]
- See http://eval.esss.lu.se/cgi-bin/public/DocDB/ShowDocument?docid=274, “European Spallation Source—Technical Design Report”, ESS-2013-001 (2013) [Google Scholar]
- C. Höglund et al., J. Appl. Phys. 111, 104908 (2012) [CrossRef] [Google Scholar]
- C.-C. Lai et al, Surf. Coat. Tech. 433, 128160 (2022) [CrossRef] [Google Scholar]
- M. Anastasopoulos et al., J. Inst. 12, P04030 (2017) [Google Scholar]
- J. C. Lacy et al., IEEE Nucl. Sci. Conf. Rec., 3971 (2010) [Google Scholar]
- J. C. Lacy et al., IEEE NSS MIC Conference Seattle, WA, USA, (2014) [Google Scholar]
- H. J. Taylor, Proc. Phys. Soc. 47, 873 (1935) [CrossRef] [Google Scholar]
- B.T.M. Willis and C. J. Carlile, „Experimental Neutron Scattering”, Oxford University Press (2009) [Google Scholar]
- I. Stefanescu et al., J. Inst. 12, P01019 (2017) [Google Scholar]
- J. Fenske et al., Journal of Physics: Conference Series, 746, 012009 (2016) [CrossRef] [Google Scholar]
- Moriai, S. Torii, H. Suzuki, S. Harjo, Y. Morii, M. Arai, Y. Tomota, T. Suzuki, Y. Akiniwa, H. Kimura, K. Akita: Physica B, 385-386, 10431045 (2006) [CrossRef] [Google Scholar]
- W. Kockelmann, S.Y. Zhang, J.F. Kelleher, J.B. Nightingale, G. Burca, J.A. James, Physics Procedia, 43, 100-110 (2013) [CrossRef] [Google Scholar]
- M.A.M. Bourke, D.C. Dunand, and E. Ustundag, Appl. Phys. A: Mat. Sci. Proc. 74, 1707-1709 (2002) [Google Scholar]
- J. R. Santisteban, M. R. Daymond, J. A. James and L. Edwards, J. Appl. Cryst., 39, 812-825 (2006) [CrossRef] [Google Scholar]
- X.-L. Wang, T.M. Holden, G.Q. Rennich, A.D. Stoica, P.K. Liaw, H. Choo, C.R. Hubbard, Phys. B: Cond. Mat., 385-386, 673-675, (2006) [CrossRef] [Google Scholar]
- M. T. Hutchings, P. J. Withers, T. M. Holden and T. Lorentzen, “Introduction to the characterization of residual stress by Neutron diffraction”, Taylor & Francis Group, LLC, (2005) [Google Scholar]
- J. Lindsay et al., CERN 74-12 (1974) [Google Scholar]
- A. Epstein and C. Boulin, IEEE Trans. Nucl. Sci. 43, 159 (1996) [CrossRef] [Google Scholar]
- J. B. Khazaie and C. Boulin, IEEE Trans. Nucl. Sci. 43, 197 (1996) [CrossRef] [Google Scholar]
- J. B. Khazaie and C. Boulin, IEEE Trans. Nucl. Sci. 43, 193 (1996) [CrossRef] [Google Scholar]
- G. Pahl and W. Beitz, „Konstruktionslehre“ Grundlagen, 7. Auflage. Springer Verlag, (2007) [Google Scholar]
- R. G. Budymas and J. K. Nisbett, “Shigley’s Mechanical Engineering Design”, TBS; 8th edition (2006) [Google Scholar]
- W. H. Bragg, Phil. Mag. 10, (57): 318 (1905) [CrossRef] [Google Scholar]
- J. P. Biersack and L. Haggmark, Nucl. Instrum. Meth. 174, 257 (1980) [CrossRef] [Google Scholar]
- J. F. Ziegler, J. P. Biersack, and U. Littmark, “The Stopping and Range of Ions in Solids”, Pergamon, New York, Vol. 1. (1985) [Google Scholar]
- F. Piscitelli et al., J. Inst. 8, P04020 (2013) [Google Scholar]
- J. F. Ziegler, M. D. Ziegler and J. P. Biersack, Nucl. Instrum. Meth. Phys. Res. Sect. B, 268, 1818 (2010) [CrossRef] [Google Scholar]
- http://www.srim.org/; [Google Scholar]
- TRIM/SRIM, Textbook on http://www.srim.org/ [Google Scholar]
- Stefanescu et al., J. Inst. 14, P10020 (2019) [Google Scholar]
- https://geant4.web.cern.ch/node/1 [Google Scholar]
- S. Agostinelli et al., Nucl. Instrum. Meth. A, 506, 3, 250–303 (2003) [CrossRef] [Google Scholar]
- J. Allison et al., IEEE Trans. Nucl. Sci. 53, 1, 270-278 (2006) [Google Scholar]
- J. Allison et al., Nucl. Instrum. Meth. A, 835, 186-225 (2016) [CrossRef] [Google Scholar]
- J. Orban et al., Nucl. Instrum. Meth. A, 632, 124 (2011) [CrossRef] [Google Scholar]
- I. Stefanescu et al., J. Inst. 8, P12003 (2013) [Google Scholar]
- R. v. Mises, Z. Angew. Math. Mech. 8, 161 (1928) [Google Scholar]
- F. U. Mathiak, “Die Methode der finiten Elemente (FEM)”, Neubrandenburg (2010) [Google Scholar]
- R. Kampmann, M. Marmotti, M. Haese-Seiller, V. Kudryashov, Nucl. Instrum. Meth. A, 529, 342-347 (2004) [CrossRef] [Google Scholar]
- M. Marmotti, M. Haese-Seiller, R. Kampmann, Physica B, 276-278, 210-211 (2000) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.