EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 367 (2026) EPJ Web Conf., 367 (2026) 01005 References
Open Access
Issue
EPJ Web Conf.
Volume 367, 2026
Fifth International Conference on Robotics, Intelligent Automation and Control Technologies (RIACT 2026)
Article Number 01005
Number of page(s) 10
Section Robotics Design and Control
DOI https://doi.org/10.1051/epjconf/202636701005
Published online 29 April 2026
  1. M. Cavazzuti, A. Baldini, E. Bertocchi, D. Costi, E. Torricelli, and P. Moruzzi, “High performance automotive chassis design: a topology optimization based approach,” Struct Multidisc Optim, vol. 44, no. 1, pp. 45–56, Oct. 2010, doi: 10.1007/s00158-010-0578-7. [Google Scholar]
  2. A. Balayan, R. Mallick, S. Dwivedi, S. Saxena, B. Haorongbam, and A. Sharma, “Optimal Design of Quadcopter Chassis Using Generative Design and Lightweight Materials to Advance Precision Agriculture,” Machines, vol. 12, no. 3, p. 187, Mar. 2024, doi: 10.3390/machines12030187. [Google Scholar]
  3. F. Boussuge et al., “Capturing simulation intent in an ontology: CAD and CAE integration application,” Journal of Engineering Design, vol. 30, no. 10–12, pp. 688–725, June 2019, doi: 10.1080/09544828.2019.1630806. [Google Scholar]
  4. A. H. Azman, F. Vignat, and F. Villeneuve, “CAD TOOLS AND FILE FORMAT PERFORMANCE EVALUATION IN DESIGNING LATTICE STRUCTURES FOR ADDITIVE MANUFACTURING,” Jurnal Teknologi, vol. 80, no. 4, Apr. 2018, doi: 10.11113/jt.v80.12058. [Google Scholar]
  5. S. Arabshahi, D. C. Barton, and N. K. Shaw, “Steps towards CAD-FEA integration,” Engineering with Computers, vol. 9, no. 1, pp. 17–26, Mar. 1993, doi: 10.1007/bf01198250. [Google Scholar]
  6. W. Mulzer and G. Rote, “Minimum-weight triangulation is NP-hard,” J. ACM, vol. 55, no. 2, pp. 1–29, May 2008, doi: 10.1145/1346330.1346336. [CrossRef] [Google Scholar]
  7. Y. Wang, E. Lü, H. Lu, N. Zhang, and X. Zhou, “Comprehensive design and optimization of an electric vehicle powertrain equipped with a two-speed dual-clutch transmission,” Advances in Mechanical Engineering, vol. 9, no. 1, p. 168781401668314, Jan. 2017, doi: 10.1177/1687814016683144. [Google Scholar]
  8. P. Anand, D. Rajesh, M. Shunmugasundaram, and V. Anbumalar, “Finite Element Analysis of Hemp Fiber Reinforced Cellulose Filled Epoxy Hybrid Composite,” Journal of Natural Fibers, vol. 19, no. 14, pp. 9153–9166, Oct. 2021, doi: 10.1080/15440478.2021.1982809. [Google Scholar]
  9. N. L. Rane, P. Desai, J. Rane, and M. Paramesha, “Artificial intelligence, machine learning, and deep learning for sustainable and resilient supply chain and logistics management,” Deep Science, 2024. doi: 10.70593/978-81-981367-4-9_5. [Google Scholar]
  10. R. S. Baker, “A Block Adaptive Mesh Refinement Algorithm for the Neutral Particle Transport Equation,” Nuclear Science and Engineering, vol. 141, no. 1, pp. 1–12, May 2002, doi: 10.13182/nse02-a2262. [Google Scholar]
  11. R. A. Ainsworth and N. P. O’Dowd, “Constraint in the Failure Assessment Diagram Approach for Fracture Assessment,” Journal of Pressure Vessel Technology, vol. 117, no. 3, pp. 260–267, Aug. 1995, doi: 10.1115/1.2842121. [Google Scholar]
  12. J. Yan, Z. Duan, E. Lund, and J. Wang, “Concurrent multi-scale design optimization of composite frames with manufacturing constraints,” Struct Multidisc Optim, vol. 56, no. 3, pp. 519–533, July 2017, doi: 10.1007/s00158-017-1750-0. [Google Scholar]
  13. Y. Xu et al., “Machine learning based topology optimization of fiber orientation for variable stiffness composite structures,” Numerical Meth Engineering, vol. 122, no. 22, pp. 6736–6755, Sept. 2021, doi: 10.1002/nme.6809. [Google Scholar]
  14. G. A. Lyngdoh, N.-K. Kelter, S. Doner, N. M. A. Krishnan, and S. Das, “Elucidating the auxetic behavior of cementitious cellular composites using finite element analysis and interpretable machine learning,” Materials & Design, vol. 213, p. 110341, Dec. 2021, doi: 10.1016/j.matdes.2021.110341. [Google Scholar]
  15. P. Raghuweanshi, “REVOLUTIONIZING SEMICONDUCTOR DESIGN AND MANUFACTURING WITH AI,” J. Knowl. Learn. Sci. Technol., vol. 3, no. 3, pp. 272–277, Sept. 2024, doi: 10.60087/jklst.vol3.n3.p.272-277. [Google Scholar]
  16. R. Roy and A. Srivastava, “ROLE OF ARTIFICIAL INTELLIGENCE (AI) IN ENHANCING OPERATIONAL EFFICIENCY IN MANUFACTURING MEDICAL DEVICES,” The Jour Multi Res, pp. 35–40, Apr. 2024, doi: 10.37022/tjmdr.v4i1.580. [Google Scholar]
  17. R. Ajirotutu, B. Garba, and J. Olu, “Advancing lean construction through Artificial Intelligence: Enhancing efficiency and sustainability in project management,” World J. Adv. Eng. Technol. Sci., vol. 13, no. 2, pp. 496–509, Dec. 2024, doi: 10.30574/wjaets.2024.13.2.0623. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.