EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 367 (2026) EPJ Web Conf., 367 (2026) 01006 References
Open Access
Issue
EPJ Web Conf.
Volume 367, 2026
Fifth International Conference on Robotics, Intelligent Automation and Control Technologies (RIACT 2026)
Article Number 01006
Number of page(s) 13
Section Robotics Design and Control
DOI https://doi.org/10.1051/epjconf/202636701006
Published online 29 April 2026
  1. Rangappa, S. M., Ayyappan, V., & Siengchin, S. (Eds.). (2024). Additive Manufacturing Materials and Technology. Elsevier. [Google Scholar]
  2. C. Zarna, M. T. Opedal, A. T. Echtermeyer, and G. Chinga-Carrasco, “Reinforcement ability of lignocellulosic components in biocomposites and their 3D printed applications – A review,” Composites Part C: Open Access, 2021, doi: 10.1016/j.jcomc.2021.100171. [Google Scholar]
  3. C. Zarna, G. Chinga-Carrasco, and A. Echtermeyer, “Bending properties and numerical modelling of cellular panels manufactured from wood fibre/PLA biocomposite by 3D printing,” Composites. Part A, Applied science and manufacturing, 2023, doi: 10.1016/j.compositesa.2022.107368. [Google Scholar]
  4. E. Yurttaş and N. Ayrilmiş, “Mechanical and Thermal Properties of 3D-Printed Biocomposites of Polylactic Acid and Thermally Modified Wood Flour with Silver Nanoparticles,” Macromolecular materials and engineering (Print), 2023, doi: 10.1002/mame.202300180. [Google Scholar]
  5. Z. Yang, X. Feng, M. Xu, and D. Rodrigue, “Printability and properties of 3D- printed poplar fiber/polylactic acid biocomposite,” Bioresources, 2021, doi: 10.15376/biores.16.2.2774-2788. [Google Scholar]
  6. T.-C. Yang and C.-H. Yeh, “Morphology and mechanical properties of 3D printed wood fiber/polylactic acid composite parts using Fused Deposition Modeling (FDM): The effects of printing speed,” Polymers, 2020, doi: 10.3390/polym12061334. [Google Scholar]
  7. J. Yadav, P. Ramkumar, and A. K. Parwani, “Structure–property correlation assessment of LLDPE-based biocomposites with Azadirachta Indica wood flour,” Journal of Applied Polymer Science, 2024, doi: 10.1002/app.56237. [Google Scholar]
  8. K. Wong and A. Hernandez, “A Review of Additive Manufacturing,” 2012, doi: 10.5402/2012/208760. [Google Scholar]
  9. A. Vinod, J. Tengsuthiwat, R. Vijay, M. Sanjay, and S. Siengchin, “Advancing additive manufacturing: 3D-printing of hybrid natural fiber sandwich (Nona/Soy- PLA) composites through filament extrusion and its effect on thermomechanical properties,” Polymer Composites, 2024, doi: 10.1002/pc.28302. [Google Scholar]
  10. R. Velu, T. Calais, A. Jayakumar, and F. Raspall, “A Comprehensive Review on Bio-Nanomaterials for Medical Implants and Feasibility Studies on Fabrication of Such Implants by Additive Manufacturing Technique,” Materials, 2019, doi: 10.3390/ma13010092. [Google Scholar]
  11. C. Vălean, E. Linul, G. Palomba, and G. Epasto, “Single and repeated impact behavior of material extrusion-based additive manufactured PLA parts,” Journal of Materials Research and Technology, 2024, doi: 10.1016/j.jmrt.2024.03.150. [Google Scholar]
  12. J. A. Travieso-Rodriguez, M. Zandi, R. Jerez-Mesa, and J. Lluma-Fuentes, “Fatigue behavior of PLA-wood composite manufactured by fused filament fabrication,” Journal of materials research and technology, 2020, doi: 10.1016/j.jmrt.2020.06.003. [Google Scholar]
  13. D. K. Tomec, M. Schwarzkopf, R. Repič, J. Žigon, B. Gospodarič, and M. Kariž, “Effect of thermal modification of wood particles for wood-PLA composites on properties of filaments, 3D-printed parts and injection moulded parts,” European Journal of Wood and Wood Products, 2023, doi: 10.1007/s00107-023-02018-2. [Google Scholar]
  14. Y. Tao, H. Wang, Z. Li, P. Li, and S. Shi, “Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing,” Materials, 2017, doi: 10.3390/ma10040339. [Google Scholar]
  15. V. Shanmugam et al., “Fatigue behaviour of FDM-3D printed polymers, polymeric composites and architected cellular materials,” International Journal of Fatigue, 2021, doi: 10.1016/j.ijfatigue.2020.106007. [Google Scholar]
  16. N. Sgriccia, M. C. Hawley, and M. Misra, “Characterization of natural fiber surfaces and natural fiber composites,” Composites Part A-applied Science and Manufacturing, 2008, doi: 10.1016/j.compositesa.2008.07.007. [Google Scholar]
  17. S. Sethu, K. Mayandi, N. Rajini, K. Kumar, F. Mohammad, and M. A. Kumar, “Hybrid fabrication and characterization of biocompatible Bamboo/PLA composites,” Journal of Materials Research and Technology, 2024, doi: 10.1016/j.jmrt.2024.01.265. [Google Scholar]
  18. M. Salamat‐Talab, H. Kazemi, A. Akhavan‐Safar, H. Malekinejad, R. J. C. Carbas, and L. F. M. da Silva, “Effects of a Novel Three-Dimensional-Printed Wood–Polylactic Acid Interlayer on the Mode II Delamination of Composites,” Journal of Composites Science, 2024, doi: 10.3390/jcs8120489. [Google Scholar]
  19. N. Sakthivel, J. Bramsch, P. Voung, I. Swink, S. E. Averick, and H. Vora, “Investigation of 3D-printed PLA–stainless-steel polymeric composite through fused deposition modelling-based additive manufacturing process for biomedical applications,” 2020, doi: 10.1002/mds3.10080. [Google Scholar]
  20. J. J. P. Rojas, B. R. Valencia, F. J. B. Osorio, and D. Ramirez, “The role of fiber- matrix compatibility in vacuum processed natural fiber/epoxy biocomposites,” Cellulose, 2021, doi: 10.1007/s10570-021-04055-7. [Google Scholar]
  21. R. Raj, A. P. Moharana, M. Kumar, A. Kumar, A. R. Dixit, and F. Górski, “Tensile, Flexural, and Compressive Strength of Natural and Glass Fabric Composites Fabricated Using Vat-Photopolymerization Additive Manufacturing,” Journal of materials engineering and performance (Print), 2024, doi: 10.1007/s11665-024-10424-7. [Google Scholar]
  22. D. Rahmatabadi et al., “3D printing of PLA-TPU with different component ratios: fracture toughness, mechanical properties, and morphology,” Journal of Materials Research and Technology, 2022, doi: 10.1016/j.jmrt.2022.11.024. [Google Scholar]
  23. S. Petersmann et al., “Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing.,” Journal of The Mechanical Behavior of Biomedical Materials, 2020, doi: 10.1016/j.jmbbm.2019.103611. [Google Scholar]
  24. N. Narlıoğlu, T. Salan, and M. H. Alma, “Properties of 3D-Printed Wood Sawdust-Reinforced PLA Composites,” Bioresources, 2021, doi: 10.15376/biores.16.3.5467-5480. [Google Scholar]
  25. V. Mazzanti, L. Malagutti, and F. Mollica, “FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties,” Polymers, 2019, doi: 10.3390/polym11071094. [Google Scholar]
  26. O. Martikka, T. Kärki, and Q. Wu, “Mechanical Properties of 3D-Printed Wood- Plastic Composites,” Key Engineering Materials, 2018, doi: 10.4028/www.scientific.net/kem.777.499. [Google Scholar]
  27. L. Liu, M. Lin, Z. Xu, and M. Lin, “Polylactic acid-based wood-plastic 3D printing composite and its properties,” BioResources, 2019, doi: 10.15376/biores.14.4.8484-8498. [Google Scholar]
  28. M. Kianifar, M. Azadi, and F. Heidari, “Effect of simulated body fluid on the fatigue resistance of 3D-printed PLA and PLA-wood structures under cyclic bending loading,” International Journal of Fatigue, 2025, doi: 10.1016/j.ijfatigue.2025.108876. [Google Scholar]
  29. E. Kargar, S.-A. Hosseini-Taklimi, and A. Ghasemi‐Ghalebahman, “Fracture behavior of sustainable wood and PLA composites fabricated by fused deposition modeling using essential work of fracture,” Scientific Reports, 2025, doi: 10.1038/s41598-025-18766-5. [Google Scholar]
  30. E. Kargar and A. Ghasemi‐Ghalebahman, “Experimental investigation on fatigue life and tensile strength of carbon fiber-reinforced PLA composites based on fused deposition modeling,” Scientific Reports, 2023, doi: 10.1038/s41598-023-45046-x. [Google Scholar]
  31. S. Kain, J. V. Ecker, A. Haider, M. Musso, and A. Petutschnigg, “Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites,” European Journal of Wood and Wood Products, 2020, doi: 10.1007/s00107-019-01473-0. [Google Scholar]
  32. S. Joshi, L. T. Drzal, A. K. Mohanty, and S. Arora, “Are natural fiber composites environmentally superior to glass fiber reinforced composites,” Composites Part A-applied Science and Manufacturing, 2004, doi: 10.1016/j.compositesa.2003.09.016. [Google Scholar]
  33. P. J. Herrera-Franco and A. Valadez-González, “A study of the mechanical properties of short natural-fiber reinforced composites,” Composites Part B- engineering, 2005, doi: 10.1016/j.compositesb.2005.04.001. [Google Scholar]
  34. N. Herrera et al., “Valorisation of waste pulp from materials recovery facility rejects for composite applications,” Composites. Part A, Applied science and manufacturing, 2024, doi: 10.1016/j.compositesa.2024.108108. [Google Scholar]
  35. M. M. Hanon, Y. Alshammas, and L. Zsidai, “Effect of print orientation and bronze existence on tribological and mechanical properties of 3D-printed bronze/PLA composite,” The International Journal of Advanced Manufacturing Technology, 2020, doi: 10.1007/s00170-020-05391-x. [Google Scholar]
  36. R. Guo, Z. Ren, H. Bi, S. Yongming, and M. Xu, “Effect of toughening agents on the properties of poplar wood flour/poly (lactic acid) composites fabricated with Fused Deposition Modeling,” European Polymer Journal, 2018, doi: 10.1016/j.eurpolymj.2018.07.035. [Google Scholar]
  37. G. Gamon, P. Evon, and L. Rigal, “Twin-screw extrusion impact on natural fibre morphology and material properties in poly(lactic acid) based biocomposites,” Industrial Crops and Products, 2013, doi: 10.1016/j.indcrop.2013.01.026. [Google Scholar]
  38. W. E. Frazier, “Metal Additive Manufacturing: A Review,” Journal of materials engineering and performance (Print), 2014, doi: 10.1007/s11665-014-0958-z. [Google Scholar]
  39. S. Farashi and F. Vafaee, “Effect of extruder temperature and printing speed on the tensile strength of fused deposition modeling (FDM) 3D printed samples: a meta-analysis study,” International Journal on Interactive Design and Manufacturing (IJIDeM), 2022, doi: 10.1007/s12008-021-00827-4. [Google Scholar]
  40. E. Estakhrianhaghighi, A. Mirabolghasemi, L. Lessard, and A. Akbarzadeh, “3D Printed Wood-fiber Reinforced Architected Cellular Composite Beams with Engineered Flexural Properties,” Additive Manufacturing, 2023, doi: 10.1016/j.addma.2023.103800. [Google Scholar]
  41. K. Essassi, J.-L. Rebiere, A. E. Mahi, M. A. B. Souf, A. Bouguecha, and M. Haddar, “Experimental and analytical investigation of the bending behaviour of 3D-printed bio-based sandwich structures composites with auxetic core under cyclic fatigue tests,” Composites Part A-applied Science and Manufacturing, 2020, doi: 10.1016/j.compositesa.2020.105775. [Google Scholar]
  42. Y. Dong, J. Milentis, and A. Pramanik, “Additive manufacturing of mechanical testing samples based on virgin poly (lactic acid) (PLA) and PLA/wood fibre composites,” Advances in Manufacturing, 2018, doi: 10.1007/s40436-018-0211-3. [Google Scholar]
  43. S. Dev and R. Srivastava, “Effect of infill parameters on material sustainability and mechanical properties in fused deposition modelling process: a case study,” Progress in additive manufacturing, 2021, doi: 10.1007/s40964-021-00184-4. [Google Scholar]
  44. I. I. Cuesta, E. Martínez-Pañeda, A. Díaz, and J. M. Alegre, “The Essential Work of Fracture parameters for 3D printed polymer sheets,” Materials & Design (1980-2015), 2019, doi: 10.1016/j.matdes.2019.107968. [Google Scholar]
  45. S. Chaitanya and I. Singh, “Processing of PLA/sisal fiber biocomposites using direct- and extrusion-injection molding,” 2017, doi: 10.1080/10426914.2016.1198034. [Google Scholar]
  46. L. E. L. Carrillo et al., “The Effect of Raster Pattern and Acetic Acid Exposure on the Mechanical and Failure Properties of Additively Manufactured PLA and PLA- wood Composite Specimens,” Journal of Failure Analysis and Prevention, 2023, doi: 10.1007/s11668-023-01681-0. [Google Scholar]
  47. A. Boucherit, M.-N. Avettand-Fènoël, and R. Taillard, “Effect of a Zn interlayer on dissimilar FSSW of Al and Cu,” Materials & Design, 2017, doi: 10.1016/j.matdes.2017.03.063. [Google Scholar]
  48. S. Bhagia et al., “Tensile properties of 3D-printed wood-filled PLA materials using poplar trees,” Applied Materials Today, 2020, doi: 10.1016/j.apmt.2020.100832. [Google Scholar]
  49. A. Bahar, A. Hamami, F. Benmahiddine, S. Belhabib, R. Belarbi, and S. Guessasma, “The Thermal and Mechanical Behaviour of Wood-PLA Composites Processed by Additive Manufacturing for Building Insulation,” Polymers, 2023, doi: 10.3390/polym15143056. [Google Scholar]
  50. N. Ayrilmis, M. Kariz, J. H. Kwon, and M. K. Kuzman, “Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials,” The International Journal of Advanced Manufacturing Technology, 2019, doi: 10.1007/s00170-019-03299-9. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.