EPJ Web Conf.
Volume 183, 2018DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
|Number of page(s)||6|
|Published online||07 September 2018|
Inertial Impact Tests to Identify the Plastic Properties of Metals
Faculty of Engineering and the Environment, University of Southampton,
* Corresponding author : firstname.lastname@example.org
Published online: 7 September 2018
The behavior and failure mechanisms of materials often change at high strain rates (> 100 1/s) when compared with their quasi-static response. These differences are critical when designing structures or components that will be subjected to impact or blast loads. The recent progress in ultra-high speed imaging and full-field measurement techniques provides a unique opportunity to improve the quality of high strain rate test data. The objective of the current work is to design and validate an experimental technique to identify the elastoplastic material properties of metals. The methodology uses an ultra-high speed camera and the grid method to obtain time-resolved full-field deformation data as impact induced stress waves propagate in a sample. The virtual fields method is then used to inversely identify the plastic properties of the specimen. The results for five aluminum 6082-T6 impacted at 50 m/s are presented.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.